topic Re: Is there a CLI guide for Defenders? in Extreme Cloud

Is there a CLI guide for Defenders?

Jeremy_Bullock — Fri, 06 Dec 2019 04:10:15 GMT

I’m looking for a CLI guide for the Defender devices.

Re: Is there a CLI guide for Defenders?

Anonymous — Fri, 06 Dec 2019 04:54:59 GMT

The base product for Defender Application is ExtremeCloud Appliance. We do not fully support a CLI on ExtremeCloud Appliance. Instead, we encourage use of the REST API, which is fully documented. See https://extremenetworks.com/documentation/extremecloud-appliance for REST API documentation.

If you are referring to the adapter SA201, we do not have CLI definition on the AP39xx/SA201.

Re: Is there a CLI guide for Defenders?

Jeremy_Bullock — Fri, 06 Dec 2019 05:54:08 GMT

I’m trying to troubleshoot a Defender (SA201) device. I’m trying to configure the SA for external (to our network) use using this article https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-controller-s-IP-in-the-AP/?q=capply&l=en_US&c=Extreme_Software%3AIdentiFi_Wireless&fs=Search&pn=1

Currently the only remediation I have is a factory reset. I’m looking for commands to verify what I have entered or other basic commands...

Re: Is there a CLI guide for Defenders?

Brian_Anderson1 — Fri, 06 Dec 2019 21:50:57 GMT

You can run ‘cget config global’ to see your config settings. To see just the ip address you set for the article above you can run this command: cat /home/config/current.cfg | grep "cset auth" to get just those settings.

Also you can run tail -f /tmp/log/ap.log and see what the ap is currently doing, like trying to connect to the wireless controller.