AP141

noodlenz — Sat, 05 Nov 2022 22:52:51 GMT

Hello

I have several AP141 running OS Aerohive Boot Loader v1.0.0.41, Build time Wed Jun 11 04:43:36 2014
HiveOS 6.1r6.

After a factory reset via the rest button, I can log into via the serial connection. I can access the u-boot menu.

I tried to upgrade via https://aus.extremecloudiq.com/#/devices

I can add the AP141, however the upgrade process fails.
"The Aerohive device was unable to save the image to flash memory. Reboot and try again. "

Aerohive Networks Inc.
Copyright (C) 2006-2014

Running image: Current version

Current version: HiveOS 6.1r6 release build1779
Build host: hq-dev6
Build time: Wed Jun 11 04:43:36 UTC 2014
Build by: buildmaster
Build cookie: 20140610-2857
Platform: HiveAP141
Bootloader ver: v1.0.0.41
TPM ver: v1.2.35.8
Uptime: 0 weeks, 0 days, 0 hours, 53 minutes, 50 seconds

I'm able to access the web interface and can try to upload firmware direct.

I'm able to to setup a tftp server and can try to upload the firmware direct.

Thank you for your support.

Re: AP141

SamPirok — Mon, 07 Nov 2022 12:31:44 GMT

Hello, with devices on 6.1r6, you need to go to 6.2r1 first, and then you can jump to any later version of firmware without moving stepwise through all of the versions. Could you please try upgrading to 6.2r1 first and let us know if you still have any issues upgrading your devices?

topic Re: AP141 in Extreme Cloud

AP141

Re: AP141