NetSight - Traps not Being Received After Upgrade to version 4.4

FAQ_User — Thu, 19 Dec 2013 04:33:00 GMT

Article ID: 15029

Products
NetSight Console

Changes
Upgrade to version 4.4 was performed.

Symptoms
Traps are no longer being received in NetSight Traps view.

Cause
Code missing to make sure the trap file and the SNMP mode is correct after restoring files on an upgrade.

Solution/Workaround
Upgrade to NetSight Suite version 5.0 or higher.
Release notes state, in the '

code:

Console Issues Addressed

' section:

code:

Resolved an upgrade problem that caused the trap service to not process traps in some cases.

code:

Pre-upgrade workaround:
1. Start NetSight Console.
2. Select

code:

Tools

code:

Options

code:

Suite Options

code:

Advanced SNMP settings

.
3. Check the option to use NetSNMP.
4. Save and restart the server when asked.

Edit the file

code:

/NetSight_Install_Path/NetSight/appdata/snmptrapd.conf

.

Make sure that the first uncommented line is:

code:

disableAuthorization yes

If it is not please add it and then start the SNMP trap service.

topic NetSight - Traps not Being Received After Upgrade to version 4.4 in FAQs

NetSight - Traps not Being Received After Upgrade to version 4.4