topic Enterasys Controller f/w 8.11.03.0024 VNS VLAN Tag configuration lost upon Wizard Completion in FAQs https://community.extremenetworks.com/t5/faqs/enterasys-controller-f-w-8-11-03-0024-vns-vlan-tag-configuration/m-p/43494#M178 Article ID: 14680 <BR /> <BR /> <B>Products</B><BR /> C20, C25, C4110, C5110, V2110; firmware 8.11.01.0161, 8.11.02.0023, 8.11.03.0024<BR /> Enterasys (formerly HiPath) Wireless Controller <BR /> <BR /> <B>Changes</B><BR /> Configuring a Bridged at AP topology with a Tagged VLAN, using the VNS Wizard. <BR /> <BR /> <B>Symptoms</B><BR /> Upon Wizard completion, its configured Tagged VLAN information is not present. <BR /> <BR /> <B>Cause</B><BR /> There is a miscommunication between the finish of the Wizard (when all options chosen during the Wizard steps are fully configured on the controller) and the view of the topology's VLAN information. <BR /> <BR /> <B>Solution/Workaround</B><BR /> Upgrade to firmware 8.11.04.0039 or higher. <BR /> <BR /> Pre-upgrade workaround: Configure the topology's VLAN information manually, after using the Wizard. Mon, 02 Dec 2013 21:10:00 GMT FAQ_User 2013-12-02T21:10:00Z Enterasys Controller f/w 8.11.03.0024 VNS VLAN Tag configuration lost upon Wizard Completion https://community.extremenetworks.com/t5/faqs/enterasys-controller-f-w-8-11-03-0024-vns-vlan-tag-configuration/m-p/43494#M178 Article ID: 14680 <BR /> <BR /> <B>Products</B><BR /> C20, C25, C4110, C5110, V2110; firmware 8.11.01.0161, 8.11.02.0023, 8.11.03.0024<BR /> Enterasys (formerly HiPath) Wireless Controller <BR /> <BR /> <B>Changes</B><BR /> Configuring a Bridged at AP topology with a Tagged VLAN, using the VNS Wizard. <BR /> <BR /> <B>Symptoms</B><BR /> Upon Wizard completion, its configured Tagged VLAN information is not present. <BR /> <BR /> <B>Cause</B><BR /> There is a miscommunication between the finish of the Wizard (when all options chosen during the Wizard steps are fully configured on the controller) and the view of the topology's VLAN information. <BR /> <BR /> <B>Solution/Workaround</B><BR /> Upgrade to firmware 8.11.04.0039 or higher. <BR /> <BR /> Pre-upgrade workaround: Configure the topology's VLAN information manually, after using the Wizard. Mon, 02 Dec 2013 21:10:00 GMT https://community.extremenetworks.com/t5/faqs/enterasys-controller-f-w-8-11-03-0024-vns-vlan-tag-configuration/m-p/43494#M178 FAQ_User 2013-12-02T21:10:00Z