topic RE: show logging buffer in FAQs

show logging buffer

Mark_Lee — Thu, 17 Apr 2014 10:28:00 GMT

S4 don't display any logs on show logging buffer with "Show Logging Buffer failed, only one instance allowed" message on show support.

Could you please verify if this symptom is hardware failure?

RE: show logging buffer

Jason_Parker — Thu, 17 Apr 2014 12:32:00 GMT

Could you please post message and show config logging so we can review Other than that I would open a case with GTAC so we can get to the root cause of the message Thanks Jason

RE: show logging buffer

Mark_Lee — Thu, 17 Apr 2014 12:50:00 GMT

OK, Where can I upload "show support" file on this reply?

RE: show logging buffer

Jason_Parker — Thu, 17 Apr 2014 13:05:00 GMT

I am not sure you wNt to advertise all of your information to the world If you want to send it to jparker@extremenetworks.com I can look at it when I get to work

RE: show logging buffer

Jason_Parker — Thu, 17 Apr 2014 13:06:00 GMT

We may need to create a case if this is an issue so we end up helping everyone

RE: show logging buffer

Mark_Lee — Thu, 17 Apr 2014 13:08:00 GMT

OK, Thanks,

RE: show logging buffer

Jason_Parker — Thu, 17 Apr 2014 13:11:00 GMT

https://community.extremenetworks.com/extreme/topics/capturing_securestack_error_messages_in_the_logging_buffer_and_syslog