https://community.extremenetworks.com/t5/faqs/s-series-7-x-default-state-changes/m-p/46497#M399 Article ID: 12516 <BR /> <BR /> <B>Products</B><BR /> S-Series, firmware 7.x<BR /> Matrix N-Series DFE, firmware 7.x <BR /> <BR /> <B>Solution</B><BR /> As a change from N-Series 6.x firmware, in 7.x firmware the following protocols have been disabled by default at the port level:<UL> <LI>LACP - To enable on all ports: 'set port lacp port *.*.* enable' </LI><LI>GVRP - To enable on all ports: 'set gvrp enable *.*.*'</LI></UL>See also: <A href="http://bit.ly/1g8Sbz1" target="_blank" rel="nofollow noreferrer noopener">5203</A>, <A href="http://bit.ly/1b234gU" target="_blank" rel="nofollow noreferrer noopener">5237</A>, <A href="http://bit.ly/1aYzDfC" target="_blank" rel="nofollow noreferrer noopener">13381</A>, and <A href="http://bit.ly/182oN8r" target="_blank" rel="nofollow noreferrer noopener">13678</A>. Mon, 25 Nov 2013 22:50:00 GMT FAQ_User 2013-11-25T22:50:00Z https://community.extremenetworks.com/t5/faqs/s-series-7-x-default-state-changes/m-p/46497#M399 Article ID: 12516 <BR /> <BR /> <B>Products</B><BR /> S-Series, firmware 7.x<BR /> Matrix N-Series DFE, firmware 7.x <BR /> <BR /> <B>Solution</B><BR /> As a change from N-Series 6.x firmware, in 7.x firmware the following protocols have been disabled by default at the port level:<UL> <LI>LACP - To enable on all ports: 'set port lacp port *.*.* enable' </LI><LI>GVRP - To enable on all ports: 'set gvrp enable *.*.*'</LI></UL>See also: <A href="http://bit.ly/1g8Sbz1" target="_blank" rel="nofollow noreferrer noopener">5203</A>, <A href="http://bit.ly/1b234gU" target="_blank" rel="nofollow noreferrer noopener">5237</A>, <A href="http://bit.ly/1aYzDfC" target="_blank" rel="nofollow noreferrer noopener">13381</A>, and <A href="http://bit.ly/182oN8r" target="_blank" rel="nofollow noreferrer noopener">13678</A>. Mon, 25 Nov 2013 22:50:00 GMT https://community.extremenetworks.com/t5/faqs/s-series-7-x-default-state-changes/m-p/46497#M399 FAQ_User 2013-11-25T22:50:00Z