Power Over Ethernet options for the DFE

FAQ_User — Wed, 04 Dec 2013 07:49:00 GMT

Article ID: 5635

Products
DFE
7H4385-49
7G4285-49
7G4205-72
4H4285-49
4G4285-49
4G4205-72
7C105-P
N-POE
N-POE-1200W
DFE-POE-CBL-2M

Protocols/Features
PoE

Solution
The Power-over-Ethernet blades released for the DFE product line are:

7H4385-49 (Platinum line)
7G4285-49 (Platinum line)
7G4205-72 (Platinum line)
4H4285-49 (Gold line)
4G4285-49 (Gold line)
4G4205-72 (Gold line)

PoE blades may be inserted into any of the same chassis types used by non-PoE blades (5275) and will power up and generally function normally. However, if PoE is to be provided to attached clients, there are other considerations.

PoE-destined power may be provided to these blades in one of two ways:

When using the 7C105-P chassis; over the backplane from 1-4 installed N-POE-1200W power units. 7C105-P Installation Guide
When using any chassis; via each blade's front panel DC connector (the DFE-POE-CBL-2M power cable required for each blade must be purchased separately), from the N-POE Power Shelf and 1-4 installed N-POE-1200W power units.
See also: 5181.

topic Power Over Ethernet options for the DFE in FAQs

Power Over Ethernet options for the DFE