https://community.extremenetworks.com/t5/faqs/overview-of-the-s-series-s1-chassis/m-p/49904#M628 Article ID: 14584 <BR /> <BR /> <B>Products</B><BR /> S1-CHASSIS <BR /> <BR /> <B>Discussion</B><BR /> The S1-CHASSIS (also known as the "S1") is a single-slot chassis that supports one S-Series fabric module of any type (S130, S150, or S155), so depending upon the module can offer up to 72 ports of Gigabit Ethernet or 16 ports of 10-Gigabit Ethernet connectivity. It also supports a USB port to upgrade the installed fabric module (<A href="http://bit.ly/I1gVOa" target="_blank" rel="nofollow noreferrer noopener">12740</A>) and to upload and download files from the system (<A href="http://bit.ly/1aDPa7U" target="_blank" rel="nofollow noreferrer noopener">12452</A>), and a COM port for serial management (<A href="http://bit.ly/18kWxRZ" target="_blank" rel="nofollow noreferrer noopener">12453</A>). <BR /> <BR /> The more commonly referenced S1 part numbers are: <BR /> S1-CHASSIS Chassis and fan tray. (1-2 Power supplies and 1 Fabric module ordered separately)<BR /> SSA-AC-PS-1000W AC and PoE power supply, 15A, 110-240VAC input (1000/1200W)<BR /> S1-FAN Spare fan tray<BR /> S1-EOS-VSB Virtual Switch Bonding license<BR /> Any fabric module used in the S1-CHASSIS requires firmware 7.62.01.0009 or higher in order to fully boot up and operate, and requires firmware 7.71.01.0010 or higher in order to support Virtual Switch Bonding (VSB). <BR /> <BR /> The following information is paraphrased from release notes:<BR /> Maximum User Capacity: 2,048 (2K) (as with S4/S6/S8 with one fabric module only)<BR /> Link Aggregation (LAG): 127 LAGs per chassis with up to 64 ports per LAG (as with S4/S6/S8)<BR /> Advanced Routing License: As with S4/S6/S8<BR /> <BR /> KNOWN RESTRICTIONS AND LIMITATIONS:<BR /> The S1-Chassis requires the SSA-AC-PS-1000W power supplies. (The SSA-AC-PS-625W must<BR /> not be used in the S1-Chassis. The Fabrics/Option Modules and optics along with the<BR /> Fans can exceed the power available in the 625W supply during the startup conditions<BR /> and when the fans operate at full speed.)<BR /> <BR /> HW Feature Enhancements in 7.71.01.0010:<BR /> Virtual Switch Bonding (VSB) is supported in the S1-Chassis. The S1-Chassis may be<BR /> bonded to other S1-Chassis only. When chassis are configured using S130 or S150 I/O<BR /> Fabrics the VSB feature requires a S1-EOS-VSB license be present in each chassis<BR /> participating in the bond. Chassis populated with S155 I/O Fabrics only do not<BR /> require the license to use the VSB feature.<BR /> For more detail, please refer directly to <A href="https://extranet.enterasys.com/downloads/Pages/S.aspx" target="_blank" rel="nofollow noreferrer noopener">Firmware release notes, and Documentation/manuals</A>. Wed, 20 Nov 2013 00:23:00 GMT FAQ_User 2013-11-20T00:23:00Z https://community.extremenetworks.com/t5/faqs/overview-of-the-s-series-s1-chassis/m-p/49904#M628 Article ID: 14584 <BR /> <BR /> <B>Products</B><BR /> S1-CHASSIS <BR /> <BR /> <B>Discussion</B><BR /> The S1-CHASSIS (also known as the "S1") is a single-slot chassis that supports one S-Series fabric module of any type (S130, S150, or S155), so depending upon the module can offer up to 72 ports of Gigabit Ethernet or 16 ports of 10-Gigabit Ethernet connectivity. It also supports a USB port to upgrade the installed fabric module (<A href="http://bit.ly/I1gVOa" target="_blank" rel="nofollow noreferrer noopener">12740</A>) and to upload and download files from the system (<A href="http://bit.ly/1aDPa7U" target="_blank" rel="nofollow noreferrer noopener">12452</A>), and a COM port for serial management (<A href="http://bit.ly/18kWxRZ" target="_blank" rel="nofollow noreferrer noopener">12453</A>). <BR /> <BR /> The more commonly referenced S1 part numbers are: <BR /> S1-CHASSIS Chassis and fan tray. (1-2 Power supplies and 1 Fabric module ordered separately)<BR /> SSA-AC-PS-1000W AC and PoE power supply, 15A, 110-240VAC input (1000/1200W)<BR /> S1-FAN Spare fan tray<BR /> S1-EOS-VSB Virtual Switch Bonding license<BR /> Any fabric module used in the S1-CHASSIS requires firmware 7.62.01.0009 or higher in order to fully boot up and operate, and requires firmware 7.71.01.0010 or higher in order to support Virtual Switch Bonding (VSB). <BR /> <BR /> The following information is paraphrased from release notes:<BR /> Maximum User Capacity: 2,048 (2K) (as with S4/S6/S8 with one fabric module only)<BR /> Link Aggregation (LAG): 127 LAGs per chassis with up to 64 ports per LAG (as with S4/S6/S8)<BR /> Advanced Routing License: As with S4/S6/S8<BR /> <BR /> KNOWN RESTRICTIONS AND LIMITATIONS:<BR /> The S1-Chassis requires the SSA-AC-PS-1000W power supplies. (The SSA-AC-PS-625W must<BR /> not be used in the S1-Chassis. The Fabrics/Option Modules and optics along with the<BR /> Fans can exceed the power available in the 625W supply during the startup conditions<BR /> and when the fans operate at full speed.)<BR /> <BR /> HW Feature Enhancements in 7.71.01.0010:<BR /> Virtual Switch Bonding (VSB) is supported in the S1-Chassis. The S1-Chassis may be<BR /> bonded to other S1-Chassis only. When chassis are configured using S130 or S150 I/O<BR /> Fabrics the VSB feature requires a S1-EOS-VSB license be present in each chassis<BR /> participating in the bond. Chassis populated with S155 I/O Fabrics only do not<BR /> require the license to use the VSB feature.<BR /> For more detail, please refer directly to <A href="https://extranet.enterasys.com/downloads/Pages/S.aspx" target="_blank" rel="nofollow noreferrer noopener">Firmware release notes, and Documentation/manuals</A>. Wed, 20 Nov 2013 00:23:00 GMT https://community.extremenetworks.com/t5/faqs/overview-of-the-s-series-s1-chassis/m-p/49904#M628 FAQ_User 2013-11-20T00:23:00Z