topic Re: how reset ap-7612? in General Discussion

how reset ap-7612?

WallyGBR83 — Tue, 12 Jan 2021 01:12:24 GMT

Hello all,

I bought online a used ap-7612 but nor me nor the seller know how it was configured.

when connected to my lan seems that is not configured to take an ip from dhcp.

how can i discover if and which ip was configured statically?

or, better, how can i reset it to factory defaults?

thanks

Re: how reset ap-7612?

Ovais_Qayyum — Tue, 12 Jan 2021 03:38:46 GMT

Hi WallyGBR83,

I believe it has a reset button. You can press and hold it for 10-15 seconds while the AP is ON and then release it, AP will reboot and should get reset. Login by using default credentials admin/admin123.

If that does not work then use “AP Discovery Tool” which I have shared here:

https://extremenetworks2com-my.sharepoint.com/:u:/g/personal/mqayyum_extremenetworks_com/EfSQ4KCQWupKp7CSH6FDZpgBEx0IebEvE1bhk94E9Lx0OA?e=BM2NeP

Hope if this helps.

Regards,

Ovais

Re: how reset ap-7612?

WallyGBR83 — Tue, 12 Jan 2021 03:53:40 GMT

Hi,

thanks for your reply.

Behind that hole there is nothing

it is for mounting to a wall.

also opening the case i can’t find any switch on the electronic board.

Meanwhile i’m waiting for your reply i found the ip address using a sniffer… wireshark.

However i don’t have the password and default one doesn’t work.

Re: how reset ap-7612?

WallyGBR83 — Tue, 12 Jan 2021 16:53:05 GMT

What about the TTL port on the back? I already have an usb to ttl interface

Re: how reset ap-7612?

Tomasz — Tue, 12 Jan 2021 22:38:55 GMT

Hi Wally,

Could you please try creating a loopback plug with short-wired pin 1+3 and pin 2+6, plug it into GE2 and boot the AP?

https://extremeportal.force.com/ExtrArticleDetail?an=000080352

That’s actually surprising to me:https://extremeportal.force.com/ExtrArticleDetail?an=000090870

Hope that helps,

Tomasz

Re: how reset ap-7612?

WallyGBR83 — Tue, 12 Jan 2021 23:24:44 GMT

Loopback plug works! thanks a lot!

about TTL interface ( now not urgent 🙂 ) do you know which is the correct config?

i mean baudrate, flow control, stop bits and parity

Re: how reset ap-7612?

Tomasz — Wed, 13 Jan 2021 04:54:59 GMT

Hi Wally,

Glad to hear!

Regarding TTL, frankly speaking I cannot find any mention of this interface in hardware docs for 7612. I’d assume WiNG default console settings, ie. Putty default + 115200 baudrate.

Hope that helps,

Tomasz

Re: how reset ap-7612?

WallyGBR83 — Thu, 14 Jan 2021 00:26:35 GMT

is it with 3.3V logic ?