https://community.extremenetworks.com/t5/general-network-management/xmc-map-shows-link-partially-down/m-p/66167#M38 <P>Have MLT with two ports (1/1 and 1/2) between two VSP 8404 switches both discovered by XMC 8.5.2.6but link shows Partially Down and not recognising that port 1/1 has been fixed. Port 1/1 was down for sometime and has recently come up after a faulty fibre was replaced. Tried rediscovering both switches but stays yellow and thinks 1/1 is still down but on ECLI it is up.</P><P>How can I refresh the status of the MLT link to show green with both ports?</P><P>Thanks,</P><P>Rob</P> Fri, 30 Apr 2021 00:34:37 GMT RobertD1 2021-04-30T00:34:37Z https://community.extremenetworks.com/t5/general-network-management/xmc-map-shows-link-partially-down/m-p/66167#M38 <P>Have MLT with two ports (1/1 and 1/2) between two VSP 8404 switches both discovered by XMC 8.5.2.6but link shows Partially Down and not recognising that port 1/1 has been fixed. Port 1/1 was down for sometime and has recently come up after a faulty fibre was replaced. Tried rediscovering both switches but stays yellow and thinks 1/1 is still down but on ECLI it is up.</P><P>How can I refresh the status of the MLT link to show green with both ports?</P><P>Thanks,</P><P>Rob</P> Fri, 30 Apr 2021 00:34:37 GMT https://community.extremenetworks.com/t5/general-network-management/xmc-map-shows-link-partially-down/m-p/66167#M38 RobertD1 2021-04-30T00:34:37Z