topic RE: HowTo - ExtremeControl & XIQ AccessPoints in Hero Discussions

HowTo - ExtremeControl & XIQ AccessPoints

Zdeněk_Pala — Sat, 06 Feb 2021 01:08:00 GMT

If you are interested how to integrate ExtremeControl and XIQ APs

RE: HowTo - ExtremeControl & XIQ AccessPoints

CWurm — Thu, 25 Feb 2021 17:44:00 GMT

Great guide, thank you Zdenek!

Do you also have a guide on how to properly configure XIQ APs as RADIUS proxy as I don’t want to add every single XIQ AP manually into XMC/Control 🙂 I would prefer selecting two APs as RADIUS proxy and only add them into the Control.

Kind regards

Christian

RE: HowTo - ExtremeControl & XIQ AccessPoints

Volker_Kull — Fri, 26 Feb 2021 20:09:00 GMT

@CWurm: matching the point. This is a base requirement dealing with control and future automation processes as well.

RE: HowTo - ExtremeControl & XIQ AccessPoints

Zdeněk_Pala — Mon, 01 Mar 2021 05:09:00 GMT

Hi Cristian.

No, I do not have such a guide. There is a workflow that will sync the APs from XIQ to XMC (XIQ-SE) => your control can be updated automatically.

RE: HowTo - ExtremeControl & XIQ AccessPoints

LeoP1 — Fri, 26 Mar 2021 03:48:00 GMT

Great info Z!

Congrats!!!

RE: HowTo - ExtremeControl & XIQ AccessPoints

Zdeněk_Pala — Mon, 31 May 2021 14:20:00 GMT

Attached is the updated version for ExtremeCloud IQ - Site Engine