https://community.extremenetworks.com/t5/hero-product-suggestions/xcc-separate-configuration-options-for-auto-channel-und-auto/m-p/58279#M7 <P>XCC: With RF Policy we can configure the baseline for&nbsp;channel selection and power range. Using this RF profile with a&nbsp;device group in the site configuration it will be activated on the APs in this device group. Having the requirement to fix the used channel of an AP - f.e. in case of DFS areas or specific usecases - but need to have still auto power enabled, this will not work. Using a overwrite of RF configuration on AP with a static channel the power settings will be static as well.</P><P>The requirement is to&nbsp;use auto power function with a static channel selection on a per AP basis.</P><P>EWC &amp; XIQ can do that...</P><P>br</P><P>Volker</P><P>&nbsp;</P> Fri, 13 Nov 2020 19:44:00 GMT Volker_Kull 2020-11-13T19:44:00Z https://community.extremenetworks.com/t5/hero-product-suggestions/xcc-separate-configuration-options-for-auto-channel-und-auto/m-p/58279#M7 <P>XCC: With RF Policy we can configure the baseline for&nbsp;channel selection and power range. Using this RF profile with a&nbsp;device group in the site configuration it will be activated on the APs in this device group. Having the requirement to fix the used channel of an AP - f.e. in case of DFS areas or specific usecases - but need to have still auto power enabled, this will not work. Using a overwrite of RF configuration on AP with a static channel the power settings will be static as well.</P><P>The requirement is to&nbsp;use auto power function with a static channel selection on a per AP basis.</P><P>EWC &amp; XIQ can do that...</P><P>br</P><P>Volker</P><P>&nbsp;</P> Fri, 13 Nov 2020 19:44:00 GMT https://community.extremenetworks.com/t5/hero-product-suggestions/xcc-separate-configuration-options-for-auto-channel-und-auto/m-p/58279#M7 Volker_Kull 2020-11-13T19:44:00Z