<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic ESVT does not run with Size Frame bigger than 1518 bytes in Network Architecture &amp; Design</title>
    <link>https://community.extremenetworks.com/t5/network-architecture-design/esvt-does-not-run-with-size-frame-bigger-than-1518-bytes/m-p/13753#M1157</link>
    <description>Hello all,&lt;BR /&gt;
&lt;BR /&gt;
I am using two X770, and I am testing the throughput using the ESVT tool.&lt;BR /&gt;
&lt;BR /&gt;
For that test, I enable the jumbo frames in both switches, and create the test vlan to test a 40Gb link.&lt;BR /&gt;
&lt;BR /&gt;
If I run the test with a Size Frame of 64 or 1518, it runs fine, and with no problems.&lt;BR /&gt;
&lt;BR /&gt;
But, If I increment the size to another value more than 1518 it does not work.&lt;BR /&gt;
&lt;BR /&gt;
Do you know if this is a limitation of the tool ESVT?&lt;BR /&gt;
&lt;BR /&gt;
I also increase the ip-mtu size of the vlan to 9194, but with no success.&lt;BR /&gt;
&lt;BR /&gt;
create vlan test40Gb tag 1040&lt;BR /&gt;
configure vlan test40Gb add port 1:101 tagged&lt;BR /&gt;
configure vlan test40Gb ipaddress 10.0.40.1/24 (and 10.0.40.2/24 in the other switch)&lt;BR /&gt;
enable ipforwarding test40Gb&lt;BR /&gt;
&lt;BR /&gt;
enable jumbo-frame ports all&lt;BR /&gt;
configure ip-mtu 9194 "test40Gb"&lt;BR /&gt;
&lt;BR /&gt;
run esvt traffic-test "test40Gb" loopback-port 1:97 peer-switch-ip 10.0.40.2 packet-size 9000 rate 40 Gbps duration 60 seconds&lt;BR /&gt;
&lt;BR /&gt;
====================================================================================&lt;BR /&gt;
VLAN       Status   Loopback   Duration    Tx Rate   Tx Frame   Tx Total   Rx Total&lt;BR /&gt;
                      Port    (hh??ss)    (Kbps)     Size      Frames     Frames&lt;BR /&gt;
====================================================================================&lt;BR /&gt;
test40Gb   Completed  1:97     00:01:00  40000000        64  3407020474 3407020474   &lt;BR /&gt;
test40Gb   Completed  1:97     00:01:00  40000000      1518   195051038  195051038   &lt;BR /&gt;
test40Gb   Error           1:97     00:01:00  40000000      9000           0          0&lt;BR /&gt;
&lt;BR /&gt;
====================================================================================&lt;BR /&gt;
VLAN Name                      :  test40Gb   &lt;BR /&gt;
Port                                    :  1:101      &lt;BR /&gt;
IP Address                         :  10.0.40.2  &lt;BR /&gt;
&lt;B&gt;Status                               :  Error &lt;/B&gt;&lt;B&gt;  &lt;/B&gt;          &lt;BR /&gt;
        Duration (hh??ss)          :  00:01:00&lt;BR /&gt;
        Loopback Port                   :  1:97       &lt;BR /&gt;
        TX rate (Kbps)                   :  40000000   &lt;BR /&gt;
        TX Frame Size (bytes)       :  9000       &lt;BR /&gt;
        TX Frame                           :  0          &lt;BR /&gt;
        RX Frame                           :  0          &lt;BR /&gt;
        Frames Lost                        :  0          &lt;BR /&gt;
        &lt;B&gt;Error Cause                      :&lt;/B&gt;&lt;BR /&gt;
&lt;BR /&gt;
&lt;ESVT.TXPDUFAIL&gt; Slot-1: Transmit PDU Failed from port 1:97; Reason[Failed to Send packet to loopback port]&lt;BR /&gt;
&lt;BR /&gt;
Thanks for any suggestions.&lt;/ESVT.TXPDUFAIL&gt;</description>
    <pubDate>Fri, 19 May 2017 20:19:00 GMT</pubDate>
    <dc:creator>Xperia_Go</dc:creator>
    <dc:date>2017-05-19T20:19:00Z</dc:date>
    <item>
      <title>ESVT does not run with Size Frame bigger than 1518 bytes</title>
      <link>https://community.extremenetworks.com/t5/network-architecture-design/esvt-does-not-run-with-size-frame-bigger-than-1518-bytes/m-p/13753#M1157</link>
      <description>Hello all,&lt;BR /&gt;
&lt;BR /&gt;
I am using two X770, and I am testing the throughput using the ESVT tool.&lt;BR /&gt;
&lt;BR /&gt;
For that test, I enable the jumbo frames in both switches, and create the test vlan to test a 40Gb link.&lt;BR /&gt;
&lt;BR /&gt;
If I run the test with a Size Frame of 64 or 1518, it runs fine, and with no problems.&lt;BR /&gt;
&lt;BR /&gt;
But, If I increment the size to another value more than 1518 it does not work.&lt;BR /&gt;
&lt;BR /&gt;
Do you know if this is a limitation of the tool ESVT?&lt;BR /&gt;
&lt;BR /&gt;
I also increase the ip-mtu size of the vlan to 9194, but with no success.&lt;BR /&gt;
&lt;BR /&gt;
create vlan test40Gb tag 1040&lt;BR /&gt;
configure vlan test40Gb add port 1:101 tagged&lt;BR /&gt;
configure vlan test40Gb ipaddress 10.0.40.1/24 (and 10.0.40.2/24 in the other switch)&lt;BR /&gt;
enable ipforwarding test40Gb&lt;BR /&gt;
&lt;BR /&gt;
enable jumbo-frame ports all&lt;BR /&gt;
configure ip-mtu 9194 "test40Gb"&lt;BR /&gt;
&lt;BR /&gt;
run esvt traffic-test "test40Gb" loopback-port 1:97 peer-switch-ip 10.0.40.2 packet-size 9000 rate 40 Gbps duration 60 seconds&lt;BR /&gt;
&lt;BR /&gt;
====================================================================================&lt;BR /&gt;
VLAN       Status   Loopback   Duration    Tx Rate   Tx Frame   Tx Total   Rx Total&lt;BR /&gt;
                      Port    (hh??ss)    (Kbps)     Size      Frames     Frames&lt;BR /&gt;
====================================================================================&lt;BR /&gt;
test40Gb   Completed  1:97     00:01:00  40000000        64  3407020474 3407020474   &lt;BR /&gt;
test40Gb   Completed  1:97     00:01:00  40000000      1518   195051038  195051038   &lt;BR /&gt;
test40Gb   Error           1:97     00:01:00  40000000      9000           0          0&lt;BR /&gt;
&lt;BR /&gt;
====================================================================================&lt;BR /&gt;
VLAN Name                      :  test40Gb   &lt;BR /&gt;
Port                                    :  1:101      &lt;BR /&gt;
IP Address                         :  10.0.40.2  &lt;BR /&gt;
&lt;B&gt;Status                               :  Error &lt;/B&gt;&lt;B&gt;  &lt;/B&gt;          &lt;BR /&gt;
        Duration (hh??ss)          :  00:01:00&lt;BR /&gt;
        Loopback Port                   :  1:97       &lt;BR /&gt;
        TX rate (Kbps)                   :  40000000   &lt;BR /&gt;
        TX Frame Size (bytes)       :  9000       &lt;BR /&gt;
        TX Frame                           :  0          &lt;BR /&gt;
        RX Frame                           :  0          &lt;BR /&gt;
        Frames Lost                        :  0          &lt;BR /&gt;
        &lt;B&gt;Error Cause                      :&lt;/B&gt;&lt;BR /&gt;
&lt;BR /&gt;
&lt;ESVT.TXPDUFAIL&gt; Slot-1: Transmit PDU Failed from port 1:97; Reason[Failed to Send packet to loopback port]&lt;BR /&gt;
&lt;BR /&gt;
Thanks for any suggestions.&lt;/ESVT.TXPDUFAIL&gt;</description>
      <pubDate>Fri, 19 May 2017 20:19:00 GMT</pubDate>
      <guid>https://community.extremenetworks.com/t5/network-architecture-design/esvt-does-not-run-with-size-frame-bigger-than-1518-bytes/m-p/13753#M1157</guid>
      <dc:creator>Xperia_Go</dc:creator>
      <dc:date>2017-05-19T20:19:00Z</dc:date>
    </item>
    <item>
      <title>RE: ESVT does not run with Size Frame bigger than 1518 bytes</title>
      <link>https://community.extremenetworks.com/t5/network-architecture-design/esvt-does-not-run-with-size-frame-bigger-than-1518-bytes/m-p/13754#M1158</link>
      <description>This is a known issue.  This should get fixed but it's not currently scoped for any release.   &lt;A href="https://gtacknowledge.extremenetworks.com/articles/Solution/ESVT-fails-with-jumbo-frames" target="_blank" rel="nofollow noreferrer noopener"&gt;https://gtacknowledge.extremenetworks...&lt;/A&gt;</description>
      <pubDate>Sat, 20 May 2017 00:43:00 GMT</pubDate>
      <guid>https://community.extremenetworks.com/t5/network-architecture-design/esvt-does-not-run-with-size-frame-bigger-than-1518-bytes/m-p/13754#M1158</guid>
      <dc:creator>StephenW</dc:creator>
      <dc:date>2017-05-20T00:43:00Z</dc:date>
    </item>
    <item>
      <title>RE: ESVT does not run with Size Frame bigger than 1518 bytes</title>
      <link>https://community.extremenetworks.com/t5/network-architecture-design/esvt-does-not-run-with-size-frame-bigger-than-1518-bytes/m-p/13755#M1159</link>
      <description>Ok understood, thanks for the reply.&lt;BR /&gt;</description>
      <pubDate>Mon, 22 May 2017 11:48:00 GMT</pubDate>
      <guid>https://community.extremenetworks.com/t5/network-architecture-design/esvt-does-not-run-with-size-frame-bigger-than-1518-bytes/m-p/13755#M1159</guid>
      <dc:creator>Xperia_Go</dc:creator>
      <dc:date>2017-05-22T11:48:00Z</dc:date>
    </item>
  </channel>
</rss>

