begginer with access-list... unable to disable/remove

modris_bernands — Tue, 06 Jun 2017 17:01:00 GMT

Hi
I want try some ACL and get stucked.
We have summit x350 (ver.12.6.2.10).
based on https://extremeportal.force.com/ExtrArticleDetail?an=000083208 I create policy "block_any_ipv6.pol"

******* start of block_any_ipv6.pol ************
entry block_any_v6 {
if {
source-address 0:: / 0;
}
then {
deny;
}
}
******* end of block_any_ipv6.pol ************

then:
configure access-list block_any_ipv6 port 21then my connection was lost.
port 21 is tagged port for ~7vlans

switch1.12 # show access-list
Vlan Name Port Policy Name Dir Rules Dyn Rules
=================================================================== * 21 block_any_ipv6 ingress 1 0 * switch1.13 # configure access-list delete block_any_ipv6 ^ %% Invalid input detected at '^' marker.
Why I can't delete access-list on port 21?
What I don't understand?
How I can manage this in correct way and get port 21 "back in time" before this CLI
'configure access-list block_any_ipv6 port 21'

RE: begginer with access-list... unable to disable/remove

Ron_Huygens — Tue, 06 Jun 2017 17:04:00 GMT

The correct way to delete a ACL is:
'unconfigure access-list block_any_ipv6'

RE: begginer with access-list... unable to disable/remove

modris_bernands — Tue, 06 Jun 2017 17:22:00 GMT

ThankYou!
and with correct command 'unconfigure' I found correct topic https://extremeportal.force.com/ExtrArticleDetail?an=000082054
ehh...

topic RE: begginer with access-list... unable to disable/remove in Network Architecture & Design

begginer with access-list... unable to disable/remove

RE: begginer with access-list... unable to disable/remove

RE: begginer with access-list... unable to disable/remove