topic RE: Sharing some info... EOS to EXOS Quick Reference Guide in Network Architecture & Design

Sharing some info... EOS to EXOS Quick Reference Guide

LeoP1 — Mon, 24 Jul 2017 22:35:00 GMT

Hi guys,

I'm an old-school and came from the old-"Red" side, and migrating to from EOS to EXOS can be somewhat painful until you got used with the new environment (some concepts and sintaxes are quite different from the EOS)...

Maybe the EOS-guys, just like me and many of my customers, can find my "CLI-Warrior" Quick Reference Guide useful in this journey... I think it could be useful to the EXOS-guys needing to deal with the EOS gear...

This is not an complete and ultimate guide, but I hope it can be helpful. Many configurations can be done easily using EMC, but not everyone have EMC and/or are (like me) CLI lovers 😃

Please, forgive any typos or mistakes, but this is a v1.0... All contributions are welcome!

https://goo.gl/iacbya

Best regards,

-Leo

RE: Sharing some info... EOS to EXOS Quick Reference Guide

Larry_Kunz — Mon, 24 Jul 2017 23:56:00 GMT

This is very cool, Leonardo. Thanks for sharing it!

Larry Kunz
Information Development
Extreme Networks

RE: Sharing some info... EOS to EXOS Quick Reference Guide

Bin — Tue, 25 Jul 2017 04:43:00 GMT

Hello Leonardo,
This is very nice document. Thank you so much.

Best regards,
Bin

RE: Sharing some info... EOS to EXOS Quick Reference Guide

LeoP1 — Tue, 25 Jul 2017 06:39:00 GMT

Hello guys,

I'm happy and proud of this little piece of contribution...

Please, if you think it's useful, fell free to share it... I've already sent to my engineering and support teams, and they are sharing with our customer (mostly EOS customers)...

If needed, I can share the .docx with you.

Thanks for all your kind words and support!

Best regards,

-Leo

RE: Sharing some info... EOS to EXOS Quick Reference Guide

Claudio_D_Ascen — Tue, 25 Jul 2017 11:52:00 GMT

Hi Leonardo

thanks a lot for sharing this usefull document.

Regards
Claudio

RE: Sharing some info... EOS to EXOS Quick Reference Guide

AntonS — Tue, 25 Jul 2017 13:26:00 GMT

hy Leonardo,
thank you very much for your effort you put in this documentation!
we are also migrating from EOS to EXOS at the moment.
i was going through 1500 pages config guide 😉
your document is very straight forward.

my most used EOS command is not in your document
show vlan port info
in EXOS it is
show ports vid (need certain version of EXOS)
https://community.extremenetworks.com/extreme/topics/xos_show_vlan_portinfo

BTW:
Something that was not working in EOS is SSH2 public key authentication
this is very usefull if you already using it for other devices (no password for login in switches)

here are my exos commands:

create account admin user1 encrypted "PASSWORD1encrypted"
create account admin user2 encrypted "PASSWORD2encrypted"
enable ssh2 vr VR-Default

create sshd2 user-key user1 AAAAUser1KeyWithoutAnySpacesOrCRLF
create sshd2 user-key user2 AAAAUser2KeyWithoutAnySpacesOrCRLF

configure sshd2 user-key user1 add user user1
configure sshd2 user-key user2 add user user2

RE: Sharing some info... EOS to EXOS Quick Reference Guide

Steven_Lin — Thu, 17 Aug 2017 06:11:00 GMT

Thanks a lot for sharing!

RE: Sharing some info... EOS to EXOS Quick Reference Guide

AntonS — Fri, 24 May 2019 13:59:00 GMT

hy,
what is the exos equivalent to eos commad show switch uptime

code:

Switch(su)->show switch uptime
Switch     Up Time
-------- -------------------------------------
1    0 days 23 hrs 57 mins 1 secs
2    0 days 1 hrs 11 mins 44 secs
Switch(su)->

RE: Sharing some info... EOS to EXOS Quick Reference Guide

Tomasz — Fri, 24 May 2019 16:46:00 GMT

Hi Anton,

'show switch' might come useful here. 🙂
It's not an equivalent but it contains uptime information.

Hope that helps,
Tomasz

RE: Sharing some info... EOS to EXOS Quick Reference Guide

AntonS — Fri, 24 May 2019 17:23:00 GMT

yes, but not for slot2

code:

Slot-1 TST1-X440G2Stack-5.1 # show switch

SysName:     TST1-X440G2Stack-5
SysLocation:   TST1
SysContact:    
System MAC:    02:04:96:xx:xx:xx
System Type:   X440G2-24p-10G4 (Stack)

SysHealth check: Enabled (Normal)
Recovery Mode:  All
System Watchdog: Enabled

Current Time:   Fri May 24 12:22:10 2019
Timezone:     [Auto DST Enabled] GMT Offset: 60 minutes, name is Vienna.
         DST of 60 minutes is currently in effect, name is not set.
         DST begins every last Sunday March at 2:00
         DST ends every last Sunday October at 3:00

Boot Time:    Fri Apr 26 10:18:22 2019
Boot Count:    7
Next Reboot:   None scheduled
System UpTime:  28 days 2 hours 3 minutes 47 seconds

Slot:       Slot-1 *           Slot-2
         ------------------------   ------------------------
Current State:  MASTER            BACKUP (In Sync)

Image Selected:  primary           primary
Image Booted:   primary           primary
Primary ver:   22.5.1.7           22.5.1.7
         patch1-7           patch1-7
Secondary ver:  22.5.1.7           22.5.1.7
         patch1-3           patch1-3

Config Selected: primary.cfg
Config Booted:  primary.cfg
Config Automatic: NONE (Disabled)

primary.cfg    Created by ExtremeXOS version 22.5.1.7
         1222570 bytes saved on Thu May 23 19:02:00 2019

LAA MAC:     Locally Administered MAC Address Disabled
Slot-1 TST1-X440G2Stack-5.2 #

RE: Sharing some info... EOS to EXOS Quick Reference Guide

Tomasz — Fri, 24 May 2019 17:31:00 GMT

Didn't see anything else than this yet: https://community.extremenetworks.com/extremeswitching-exos-223284/xos-stack-individual-member-uptime-7789412#post19743146

RE: Sharing some info... EOS to EXOS Quick Reference Guide

AntonS — Fri, 24 May 2019 17:58:00 GMT

Thank You Tomasz!

I have this information now:

code:

Slot-1 C152-X440G2Stack-5.3 # debug hal show platform cardInfo | i "Slot:|PowerOn"
Slot: 1 State: OPERATIONAL (28) Flags: 0x40 CleanUpPend: 0
PowerOnDate: Wed Apr 10 12:18:52 2019
PowerOnDate: Sun May 5 18:54:00 2019
Slot: 2 State: OPERATIONAL (28) Flags: 0x40 CleanUpPend: 0
PowerOnDate: Tue Aug 8 14:19:24 2017
PowerOnDate: Sun May 5 18:53:59 2019

The second information is correct. Are all PowerOnDates saved on the switch?

code:

* Slot-2 C152-X440G2Stack-5.1 > show switch

SysName:     C152-X440G2Stack-5
SysLocation:
SysContact:    support@extremenetworks.com, +1 888 257 3000
System MAC:    02:04:96:xx:xx:xx
System Type:   X440G2-24p-10G4 (Stack)

SysHealth check: Enabled (Normal)
Recovery Mode:  All
System Watchdog: Enabled

Current Time:   Fri May 24 12:54:47 2019
Timezone:     [Auto DST Enabled] GMT Offset: 60 minutes, name is Vienna.
         DST of 0 minutes is currently in effect, name is not set.
         DST begins every second Sunday March at 2:00
         DST ends every first Sunday November at 2:00

Boot Time:    Sun May 5 18:50:51 2019
Boot Count:    48
Next Reboot:   None scheduled
System UpTime:  18 days 18 hours 2 minutes 40 seconds

Slot:       Slot-2 *           Slot-1
         ------------------------   ------------------------
Current State:  STANDBY           MASTER

Image Selected:  secondary          primary
Image Booted:   secondary          primary
Primary ver:   22.3.1.4           22.5.1.7
         patch1-8           patch1-3
Secondary ver:  22.5.1.7           22.5.1.7
         patch1-3           patch1-3

Config Selected: primary.cfg
Config Booted:  Factory Default
Config Automatic: NONE (Disabled)

primary.cfg    Created by ExtremeXOS version 22.5.1.7
         1135734 bytes saved on Thu May 23 19:04:39 2019

LAA MAC:     Locally Administered MAC Address Disabled
* Slot-2 C152-X440G2Stack-5.2 >