https://community.extremenetworks.com/t5/network-architecture-design/radius-authentication-through-nps-for-b-and-c-series-extreme/m-p/70747#M2574 <P>Hi,</P><P>did you find a solution to your problem.</P><P>How did you setup the NPS then?</P><P>thanks in advance.</P> Mon, 29 Mar 2021 14:58:53 GMT Sacha_Brys 2021-03-29T14:58:53Z https://community.extremenetworks.com/t5/network-architecture-design/radius-authentication-through-nps-for-b-and-c-series-extreme/m-p/70746#M2573 I'd like to setup RADIUS authentication through our NPS server for our B and C series switches. I have the configuration complete, on the switches. My issue is on the NPS server(specifically with the filter-ID). I see the request being passed to the NPS server, so I know that part is working. For the write-up, to configure the Extreme switches, at the very bottom it states:<BR /> <BR /> "Additional notesThe policy on the RADIUS server must be configured to send back a filter-ID with the accept packet. See below for syntax and options.<BR /> <B>Filter ID:</B><BR /> Enterasys:version=1:mgmt=access-mgmtType<BR /> <B>Options:</B><BR /> access-mgmtTypes supported are: ro (read-only), rw (read-write), and su (super-user)."<BR /> <BR /> <BR /> Can someone explain this part to me? I think this is where i'm falling short....<BR /> <BR /> Thanks! Tue, 29 Jan 2019 23:41:52 GMT https://community.extremenetworks.com/t5/network-architecture-design/radius-authentication-through-nps-for-b-and-c-series-extreme/m-p/70746#M2573 steve_zan 2019-01-29T23:41:52Z https://community.extremenetworks.com/t5/network-architecture-design/radius-authentication-through-nps-for-b-and-c-series-extreme/m-p/70747#M2574 <P>Hi,</P><P>did you find a solution to your problem.</P><P>How did you setup the NPS then?</P><P>thanks in advance.</P> Mon, 29 Mar 2021 14:58:53 GMT https://community.extremenetworks.com/t5/network-architecture-design/radius-authentication-through-nps-for-b-and-c-series-extreme/m-p/70747#M2574 Sacha_Brys 2021-03-29T14:58:53Z