topic ML-2452-PTA3M3 and AP310e in Network Architecture & Design

ML-2452-PTA3M3 and AP310e

_Alex_ — Tue, 19 Jul 2022 16:40:16 GMT

The ML-2452-PTA3M3 antenna has three antenna ports and supports MIMO.
The AP310 has four (excluding BLE) antenna ports.

My question - on which ports of the AccessPoint should I connect the three connectors of the antenna and which antenna settings do I have to consider for the AccessPoint configuration?

I found another similar question - but without an answer: ExtremeWireless (WiNG)

Extremenetworks

remove preview

ExtremeWireless (WiNG)

Hi,The antenna guide in page 28 lists all the compatible antennas for AP7522 EMEA.For Patch antennas there is a (*) for ML-2452-PTA3M3-036 which has three(3) co

View this on Extremenetworks >

Thanks!

Re: ML-2452-PTA3M3 and AP310e

Ronald_Dvorak — Tue, 19 Jul 2022 22:22:55 GMT

Hi,

I'd say the answer is none of them.

Here the datasheet of the AP which lists the compliant antennas for that AP model.

AP310 datasheet

-Ron

Re: ML-2452-PTA3M3 and AP310e

_Alex_ — Fri, 26 Aug 2022 11:53:25 GMT

At first sorry for the delay, I was unfortunately longer absent.
@Ronald: Thanks for the hint.

Then I ask differently - the AP7522 is compatible according to antenen guide. Where would I connect the antennas there?