https://community.extremenetworks.com/t5/network-architecture-design/nac-switch-port-resolution/m-p/12599#M3 Hey folks,<BR /> <BR /> solved the problem. SNMP did the magic <span class="lia-unicode-emoji" title=":slightly_smiling_face:">🙂</span><BR /> <BR /> Thanks<BR /> Michael Fri, 31 Oct 2014 01:50:00 GMT Michael_Kirchne 2014-10-31T01:50:00Z https://community.extremenetworks.com/t5/network-architecture-design/nac-switch-port-resolution/m-p/12598#M2 I have NAC 6.1.0.159 running with HP Procurve Switches for Authentication<BR /> <BR /> I don't get the Switch Port Information. When I trace I see that the HP switch sends the NAS Port Information:<BR /> <BR /> NAS-Port:27<BR /> NAS-Port-Type:Ethernet<BR /> NAS-Port-ID:27<BR /> <BR /> This worked with NAC 4.3.X<BR /> <BR /> Has anyone an idea?<BR /> <BR /> Best Regards<BR /> Michael Wed, 29 Oct 2014 22:20:00 GMT https://community.extremenetworks.com/t5/network-architecture-design/nac-switch-port-resolution/m-p/12598#M2 Michael_Kirchne 2014-10-29T22:20:00Z https://community.extremenetworks.com/t5/network-architecture-design/nac-switch-port-resolution/m-p/12599#M3 Hey folks,<BR /> <BR /> solved the problem. SNMP did the magic <span class="lia-unicode-emoji" title=":slightly_smiling_face:">🙂</span><BR /> <BR /> Thanks<BR /> Michael Fri, 31 Oct 2014 01:50:00 GMT https://community.extremenetworks.com/t5/network-architecture-design/nac-switch-port-resolution/m-p/12599#M3 Michael_Kirchne 2014-10-31T01:50:00Z