https://community.extremenetworks.com/t5/network-architecture-design/priority-4-5-6/m-p/13029#M433 I am sending PFC frames with priorities 0-7. when i send Pause frames for priorites 0-3 only the targeted priority stop. But when i send PAUSE for the rest all the traffic stops. The configuration is the same as i copied it from one priority to other so there can be no config miss match<BR /> . what can be the reason for this behavior? Tue, 11 Oct 2016 18:37:00 GMT Danial_Jalil 2016-10-11T18:37:00Z https://community.extremenetworks.com/t5/network-architecture-design/priority-4-5-6/m-p/13029#M433 I am sending PFC frames with priorities 0-7. when i send Pause frames for priorites 0-3 only the targeted priority stop. But when i send PAUSE for the rest all the traffic stops. The configuration is the same as i copied it from one priority to other so there can be no config miss match<BR /> . what can be the reason for this behavior? Tue, 11 Oct 2016 18:37:00 GMT https://community.extremenetworks.com/t5/network-architecture-design/priority-4-5-6/m-p/13029#M433 Danial_Jalil 2016-10-11T18:37:00Z https://community.extremenetworks.com/t5/network-architecture-design/priority-4-5-6/m-p/13030#M434 It looks that this is a duplicate of <BR /> <A href="https://community.extremenetworks.com/extreme/topics/in-priority-flow-control-pause-for-priority-greater-than-3-pauses-everything-just-like-normal-ethernet-frame-control-pause" target="_blank" rel="nofollow noreferrer noopener">https://community.extremenetworks.com/extreme/topics/in-priority-flow-control-pause-for-priority-gre...</A><BR /> <BR /> Thu, 13 Oct 2016 12:38:00 GMT https://community.extremenetworks.com/t5/network-architecture-design/priority-4-5-6/m-p/13030#M434 Ron_Huygens 2016-10-13T12:38:00Z