Automatic iSCSI Provisioning

EtherNation_Use — Wed, 08 Jan 2014 05:49:00 GMT

Create Date: Jun 13 2012 2:49PM

Hello,

I try to configure Automatic iSCSI Provisioning on X670 v1512b12-patch1-4. but I get some problems.

I did it like the document ANiSCSISAN_1789.pdf and I use the integrated iscsi.pol script.

The following error message occurs:

# configure access-list iscsi ports 15-27 ingress

Error: Policy iscsi has syntax errors

Line 20 : Rule iscsi_countdst has not been previously defined.

Where is the problem?

Thanks.

(from Michael_Vreden)

RE: Automatic iSCSI Provisioning

EtherNation_Use — Wed, 08 Jan 2014 05:49:00 GMT

Create Date: Jun 14 2012 3:50PM

Try this one:

code:

#iscsi.pol

code:

#dynamic iscsi policy for identifying iscsi traffic, prioritize, protect, and log.

code:

entry iscsi_countedge {

code:

  if {

code:

    protocol tcp;

code:

    destination-port 3260;

code:

  then {

code:

    permit;

code:

    count iscsi_countdst;

code:

entry iscsi_configureedge {

code:

  if match all {

code:

    count iscsi_countdst >= 100; period 1; hysteresis 50;

code:

  then {

code:

    qosprofile iscsi_countedge qp5;

code:

    permit iscsi_configureedge;

code:

    cli "enable jumbo-frame ports $port";

code:

    cli "create log entry iscsi_detected_onPort_$port"

code:

  else {

code:

    qosprofile iscsi_countedge qp1;

code:

    permit iscsi_configureedge;

code:

    cli "clear access-list counters";

code:

entry iscsi_countup {

code:

  if {

code:

    protocol tcp;

code:

    source-port 3260;

code:

  } then {

code:

    permit;

code:

    count iscsi_countsrc;

code:

entry iscsi_configureup {

code:

  if match all {

code:

    count iscsi_countsrc >= 100; period 1; hysteresis 50;

code:

  } then {

code:

    qosprofile iscsi_countup qp5;

code:

    permit iscsi_configureup;

code:

#   cli "enable jumbo-frame ports $port";

code:

    cli "create log entry iscsi_detected_onPort_$port";

code:

  } else {

code:

    qosprofile iscsi_countup qp1;

code:

    permit iscsi_configureup;

code:

    cli "clear access-list counters";

code:

(from john_padilla)

topic RE: Automatic iSCSI Provisioning in Scripting

Automatic iSCSI Provisioning

RE: Automatic iSCSI Provisioning