topic RE: Which all Access points are supported with rogue detector in 4511 series and 4620 AP model series in Scripting

Which all Access points are supported with rogue detector in 4511 series and 4620 AP model series

Nagaraj_Kukke — Wed, 05 Nov 2014 18:56:00 GMT

Which all Access points are supported with rogue detector in 4511 series and 4620 AP model series

RE: Which all Access points are supported with rogue detector in 4511 series and 4620 AP model series

Paul_Russo — Wed, 05 Nov 2014 22:28:00 GMT

Hello Nagaraj

All of the APs support the ability to detect rogue devices. They can do this while servicing clients on a particular channel or you can set them as a sensor. For APs like the 4610 and 4620 one radio can be set as a sensor and the other set to either 2.4 or 5Ghz. The 4511 is a single radio so if it is set to sensor then it can not service users.

I hope that helps

P

RE: Which all Access points are supported with rogue detector in 4511 series and 4620 AP model series

Nagaraj_Kukke — Wed, 05 Nov 2014 22:28:00 GMT

I need clarification on the basic wips and advance wips, what exactly it differs.

RE: Which all Access points are supported with rogue detector in 4511 series and 4620 AP model series

Nagaraj_Kukke — Wed, 05 Nov 2014 22:28:00 GMT

I need steps to perform detecting rogue on particulate channel and setting particular radio as a sensor

RE: Which all Access points are supported with rogue detector in 4511 series and 4620 AP model series

Sean_Hogston — Thu, 06 Nov 2014 20:15:00 GMT

This should give you a good explanation of the differences between basic and advanced. To set it up just create the policy and apply it to the controller.

https://www.dropbox.com/s/t399daoo85vfcj0/WIPS_COMPARE_draft.pdf?dl=0

Sean

RE: Which all Access points are supported with rogue detector in 4511 series and 4620 AP model series

thang_duc — Tue, 12 Apr 2016 20:47:00 GMT

Reset default Altitude™ 4511 Access Point, you can helps me?

RE: Which all Access points are supported with rogue detector in 4511 series and 4620 AP model series

Drew_C — Tue, 12 Apr 2016 20:47:00 GMT

<content-quote data-username="thang duc">Reset default Altitude™ 4511 Access Point, you can helps me?
</content-quote>I'm going to move this to its own thread to keep this one on topic 🙂 Please reference the new conversation here: How to factory default an Altitude AP4511?