https://community.extremenetworks.com/t5/technical-discussions/how-to-clear-the-unsaved-command/m-p/119225#M232 <P>Hi ,</P><P>I accidentally paste a few line of command in my exos switches, but I haven't save the configuration.</P><P>How to I clear the unsaved command/ cache (the prompt display&nbsp; with *) ?&nbsp;</P><P>&nbsp;</P><P>Thank you</P><P>&nbsp;</P> Mon, 07 Jul 2025 16:12:19 GMT kwchiang 2025-07-07T16:12:19Z https://community.extremenetworks.com/t5/technical-discussions/how-to-clear-the-unsaved-command/m-p/119225#M232 <P>Hi ,</P><P>I accidentally paste a few line of command in my exos switches, but I haven't save the configuration.</P><P>How to I clear the unsaved command/ cache (the prompt display&nbsp; with *) ?&nbsp;</P><P>&nbsp;</P><P>Thank you</P><P>&nbsp;</P> Mon, 07 Jul 2025 16:12:19 GMT https://community.extremenetworks.com/t5/technical-discussions/how-to-clear-the-unsaved-command/m-p/119225#M232 kwchiang 2025-07-07T16:12:19Z https://community.extremenetworks.com/t5/technical-discussions/how-to-clear-the-unsaved-command/m-p/119235#M233 <P>The simplest and most effective way to clear any unsaved configuration changes is to reboot the switch. Since the commands are only in the running configuration (RAM) and haven't been written to the persistent boot.cfg file, a reboot will restore the switch to its last saved configuration.</P> Wed, 09 Jul 2025 06:04:43 GMT https://community.extremenetworks.com/t5/technical-discussions/how-to-clear-the-unsaved-command/m-p/119235#M233 zeny79john 2025-07-09T06:04:43Z https://community.extremenetworks.com/t5/technical-discussions/how-to-clear-the-unsaved-command/m-p/119242#M235 <P>Thank you. it works</P> Thu, 10 Jul 2025 13:52:44 GMT https://community.extremenetworks.com/t5/technical-discussions/how-to-clear-the-unsaved-command/m-p/119242#M235 kwchiang 2025-07-10T13:52:44Z