topic EOS CLI commands. in Training (Extreme Dojo)

EOS CLI commands.

Rod_Robertson2 — Fri, 21 Apr 2017 20:34:00 GMT

Need EOS CLI commands for ECE requalification.

Having just failed my ECE online examination , partly due to not touching the old Enterasys hardware basically ever.. I am after a document re that systems generic cli , giving basic commands ..

The other thing that has wound me up , is that of all the studying I did , based on my EOS knowledge and the " online guides" there are many questions , that are not covered on the course , ERPS for example is one, also slot configurations on a stack EOS.. even searching the web , had little success. Anyway moan over , if someone can direct me to a decent EOS cli document it would be appreciated.

RE: EOS CLI commands.

Suzanne_Barnett — Fri, 21 Apr 2017 20:51:00 GMT

Hi Rob,

Please check the Post Sales training page on the PartnerNet there is a full EOS Course available for free to the Partners, this is the same materials that was required for the initial ECE-Networking certification. This will contain the information that was presented on the Recertification Exam.

Suzanne

RE: EOS CLI commands.

Rod_Robertson2 — Fri, 21 Apr 2017 20:51:00 GMT

Hi

I have access to the web site , though I cannot see the free EOS course