How to enable the stacking ports

  • 1 December 2014
  • 4 replies
  • 194 views

Hi Experts,

Here I just want to bother you with one little query. For the stacking ports on SummitStack module, do we need to manually enable them or the two stacking ports will be enabled automatically once inserted to Summit switch?

Thanks.
BR

4 replies

Userlevel 4
If you are using normal stacking cable then it is automatically enabled.
if you are using front oanel 10g ports as stacking ports then
you need to configure alternate stacking and enable the ports [connect cables].
If you are using normal stacking cable then it is automatically enabled.
if you are using front oanel 10g ports as stacking ports then
you need to configure alternate stacking and enable the ports [connect cables].
Thank you so much Parthiban for your prompt answer. Got it.
Userlevel 4
exos concepts guide page 139
stack configuration tasks.
there is a troubleshooting section as well.these things will be useful
Not too much explanation but whatever is required is documented
you can download user guide from support.extremenetworks.com
Userlevel 5
Hi,
Add one article for the reference:
https://gtacknowledge.extremenetworks.com/articles/How_To/Getting-started-with-Summit-Stacking

Reply