Here are the new articles that were published (January 10 - January 16 2016) in GTAC Knowledge
Sunday, January 10, 2016:
Monday, January 11, 2016:
Can Summit stacks be made up slots with different link speeds?
How to Locate the NetSight License File on the NetSight Server
Failed to install EXOS using BootROM menu.
Where Can I Find Documentation for RADAR on the IdentiFi Wireless Controllers?
Clients Have incorrect IP when APs fail-over to Backup Controller
How to recover / reset password on 7100-Series if locked out
How to create a log filter to exclude SNMP events from a particular IP
S-Series - CVE-2003-0693
S-Series - CVE-2003-0695
S-Series - CVE-2003-1562
S-Series - CVE-2003-0190
Tuesday, January 12, 2016:
what is the command to turn on or off the password lock out policy
SNMP timeouts after upgrading to EXOS 15.7
Which php Version does the IdentiFi Wireless Controller use
Multiple interfaces are Oper Status: Down
How to achieve faster MLAG convergence
What do the LEDs mean on a 4600 series Altitude access point?
In NetSight Linux installations why is there no Domain\Host name selection for Add User?
Client IP address is missing in NAC
GTAC Escalation Case Enhancement Now in Effect
PWA slow login response
Can AP37XX and AP38XX be Used For Sensors
High Packet Delay Variation when PTP traffic passes through combo port
Wednesday, January 13, 2016:
What ports are required for login to active directory
Port alias name is not displayed in notifications when alarm is properly setup
How to configure system time manully on the SIEM Console
How to find a string of data in a wireshark trace
Siem: Cannot log into a newly made account
Siem: How to share reports among other non admin users
NetSight upgrade with WAS (Wireless Access Manager)
EXOS | Error: VLAN SYS_VLAN_000 is created dynamically, can't configure ports manually on this VLAN
EWC/Indentifi Does not show up on Oneview Wireless Controller Tab
Thursday, January 14, 2016:
Summit fan replacement
NAC assigns improper RADIUS IP Server Address to EWC/Indentify controller upon an enforce
arpNd, HostDOS console messages on S-Series
arpNd, HostDOS Console Messages Saying a packet received by the Interface that Starts with IPv6 Destination address 33:33: on S-Series
EXOS | Not Getting Expected Bandwidth 10/100/1000BASE-T SFP
How is traffic handled for distribution on the Extreme Wireless Appliances Link Aggregation(LAG) ports?
Friday, January 15, 2016:
How to configure telnet for non management interfaces
How to configure an EXOS switch to administratively down a port if the link goes down.
ACL refresh causes OSPF flap
WoL subnet broadcast forwarded by directed-broadcast feature is routed by VRRP backup causing routing loop
Wireless controller's WLAN Services Setup With Authentication type FF-ECP returns "Internal Error"
Saturday, January 16, 2016: