Header Only - DO NOT REMOVE - Extreme Networks

2016-05-30: New GTAC Knowledge Articles May 22 - 28, 2016

Here are the new articles that were published May 22 - May 28 2016 in GTAC Knowledge:

Sunday, May 22, 2016:
What are the SNMP profile settings for a Barracuda Firewall

Monday, May 23, 2016:
Nessus 6.x Agent Adapter Won't Connect To NAC Appliance
K-Series slot 6 rebooted
I/G/C/B-Series f/w 6.xx Reset with "lldpXMedRemCapabilitiesEntry_get" error
disable vlan configuration isn't displayed in show configuration output
Does Extreme Analytics support decoding of MPLS tags?
Where can I find Extreme Networks SFP, SFP+, and QSFP+ transceiver modules compatibility information for Summit switches and ExtremeSwitching platforms?

Tuesday, May 24, 2016:
Where are the HTTP Web Server Port IDs configured in NetSight?
3rd Party Network Access Control (NAC) requires AP Names for Location based authentication
How To Prevent VLAN Hopping on S-Series
Java error backing up Cisco with inventory Manager
Deny Role is not working, it should be blocking a specific subnets traffic.
Does the S-Series support "IP Source Routing"?
ExtremeCloud web interface showing errors with non-English browsers.
Can map icons in OneView have their labels removed
How To Backup, Restore, and Schedule a backup of the NetSight Extreme Control Center Database
Info PAM Log Filter sshd[xxxx]: Failed password for root message seen in controller log
What are the "Unregistered" Role rules required for PBR redirection on the EWC for captive portal
How to configure PBR on EXOS or EOS switches for NAC integration
How to check and change the netsight, NAC and Purview appliances date and time.
Does EXOS support RFC-4577 "OSPF as the Provider/Customer Edge Protocol for BGP/MPLS IP Virtual Private Networks (VPNs)"
Is this WS-MBI-WALL01 s - Wall mount bracket - for identiFi AP3825e Indoor Access Point, AP3825i Indoor Access Point is required or shipped with the unit?
Which file holds the default user that Netsight run as?
mgbic-100bt-A0 no Link in S-series

Wednesday, May 25, 2016:
How To Configure an S-Series and Summit to Route Multicast Between Each Other using PIM Sparse
NAC- OSX user getting 802.1x reject after changing RADIUS certificate on NAC
What do the AP3865e LED color codes indicate?
Siem: Changing the network settings on a Siem console with multiple managed hosts
Securestack switch status showing 'not present'
Getting EPM error "Upgrade failed, script: download failed" while upgrading the switch.
NetLogin process causing memory depletion and subsequent reboots
Cant Access Both NAC Interfaces If They Are In The Same Subnet
10Gb SFP+ Copper Passive Twin-Ax Ethernet Cable link not comming up with Linux (ubuntu redhat) servers
How to detect and block a device which is enabled Proxy-ARP feature in a network
How can I downgrade the NetSight version from 7.0 to 6.3?
Can we connect coaxial barrel connector without RPS-90 to the switch X440-G2-12t-10GE4
How to Configure XSR-3250 for IPsec-GRE VPN with Router on a Stick (One-Armed Router) Configuration

Thursday, May 26, 2016:
How to determine the version of DSM on the Siem
How to verify Policy Based Routing (PBR) rule hits on EOS Chassis
How to log or verify ACL rule hits on EOS Chassis
Poor wireless coverage when using external dipole antennas
Resets with error soc_mem_clear: write VLAN.arl0[644] failed: Operation failed
Example Policy to apply cos to prioritise different traffic types
Can the IdentiFi access points be used as iperf servers?
How STP will calculates path cost of aggregate ports using dot1w and EMISTP mode?
Is there a command to save Configuration on both Primary.cfg and secondary.cfg at a time?
How to save a configuration on the Exos switches.
Ridgeline 4.0 SP2 - Unable to receive Alarm from Extreme switches

Friday, May 27, 2016:
What daughter cards are supported in the 8900-MSM128?
Does the S-10G2Xc module support 1G SFP modules?
Can I purge or remove the Analytics Database without destroying the rest of the database information in Extreme Control Center?
BGP process crashes repeatedly with signal 11
Copying and Pasting EXOS configurations may result in unexpected functionality or errored-missing lines
ERPS Multiple Failure Protection using CFM not supported in 21.1 and earlier releases
How to Disable the IdentiFi Wireless Admin Port on a V2110
X-Series message Explained: QE[0-1]: status change QM_ERROR2
How to Configure XSR to Redistribute OSPF Learned Subnet Into BGP
Can you use Extreme Altitude APs on an IdentiFi Wireless Controller?
How many configuration file can be saved via the Archive in Inventory Manager?
Does the S Series, 7100-Series, or SecureStack Support PGM (Pragmatic General Multicast)?

Saturday, May 28, 2016:
Can I transfer a license to a different switch?

0 replies

Be the first to reply!