2016-10-17: New GTAC Knowledge Articles October 09 - 15, 2016

Here are the new articles that were published October 09 - October 15, 2016 in GTAC Knowledge:

Sunday, October 09, 2016:
Client not keeping DHCP address

Monday, October 10, 2016:
How to change the Report PDF Orientation in Netsight?
Does Netsight support tacacs or is it possible to log all commands entered over ssh session
Is It Possible to Bring a VLAN operationally UP with No Ports added to the VLAN?
How do I stop repeated message from scrolling on the K and S console
How to determine PSU redundancy on S-Series
MAC To IP Resolution Using DHCP Requests Is Not Working
Execution of CLI script fails if try to create UPM profile with that script.
NAC appliance radiusd process won't start after upgrade
Kernel oops observed when IPv6 duplicate address detected in the switch.
802.1x auth stops working after switch firmware upgrade

Tuesday, October 11, 2016:
Switch Not Joining Cloud After Password Configured and Autoexec file Created
S-SeriesError An internal hardware error may have occurred while eading port counter values from MAC 12.
Client cannot connect and is constantly rejected from the Controller in a Mobility Domain
mutlicast checksum error message " Register message from, to failed the checksum test" continuously appearing
Table full message on netlogin authentication

Wednesday, October 12, 2016:
XSR Crashes on SSH2 Listener Task
How to Prioritize trafic to specific Subnet on the S-Series
Switch CIST Role Disabled itself

Thursday, October 13, 2016:
iPhone 7 shows as an Unknown Manufacturer in ExtremeWireless Client Reports
Clarification of Multiauth Precedence on the SecureStacks
Is it possible to connect a 5 or 10 meter Cooper DAC cable to the X460-G2 Front Panel ports?
Obsolete Certificate Message Regarding NAC Agent Legacy Certificate
Should AP marked as Friendly still show in Active Threads report.
Error message when trying to access Rules page in Siem

Friday, October 14, 2016:
How to test the connection between a Wireless Controller and a RADIUS Server
Why don't I get an IPv6 DHCP address on my wireless client?

Saturday, October 15, 2016:

0 replies

Be the first to reply!