Header Only - DO NOT REMOVE - Extreme Networks

2016-10-31: New GTAC Knowledge Articles October 23 - 29, 2016

Here are the new articles that were published October 23 - October 29, 2016 in GTAC Knowledge:

Sunday, October 23, 2016:
How to import EWC policy into Policy Manager

Monday, October 24, 2016:
ExtremeWireless Synchronization failed: SSID conflict for AP: []
How to Save Configuration on 800-Series Switch Via Web GUI
Cannot retrieve AP logs over a WDS/Mesh link

Tuesday, October 25, 2016:
Unable to initiate database and restart netsight services
NetSight alarm triggered indicating MD5 certificate is installed when there is no MD5 certificate installed
Routes are not up and active when they should be.
Why do I experienced a link flap when connecting the fiber between 10G MGBICs with certain SecureStacks
Bonjour Traffic Not Forwarded From Wireless Client to Airr Print Server connected by wire to the Same Securestack AS the AP
Local multicast traffic is not egressing via newly added member port in a LAG.
Log Message : no more memory
Zebra scanners cannot connect to the wireless network or fail to roam correctly

Wednesday, October 26, 2016:
How To Rate limit Specific Protocols on S-Series
Where can I Find the Pinouts for the Redundant Power Supply Connector of Summit Switches?
What is the meaning of the plus or minus character in AP channel configuration
Controller doesn't send back a CoA response to the NAC rebooting the controller resolves the problem
What is the command to delete Identity-management stale-entry
Perform a packet capture in the EXOS CLI using the command "debug packet capture"
Switch process etmon crashes with signal 10

Thursday, October 27, 2016:
Does ExtremeWireless MAC-based Authentication Feature Require and External RADIUS Server?
How to manage Analytics Appliance with AES as privacy type with Extreme Management Center
ExtremeCloud login fails, multiple logouts due to inactivity
S/N-Series VRRP Backup Router does not perform Proxy ARP
netsight: Procedure to push out a Radius IP Address change to All Switches
How do I add a port alias on a switch in the Extreme Management Center (OneView) dashboard
L2PT is not working properly after path switchover in VPWS/VPLS
Are Archives To External TFTP Server Supported in NetSight Inventory Manager
Extreme Control (NAC) will not work on 7.0 on ESX using AMD CPU, squid crashes
SNMP traps not generated for BGP state change events

Friday, October 28, 2016:
What channels ACS scans in a 3 Channel Plan for the ROW?
Can we configure netlogin idle timeout on G1 switches
Is it possible to disable IGMP snooping if MVR is enabled?
Meaning of MSM-A: Received BFD an invalid packet on VLAN Uplink Error:Invalid ttl value for single Hop session

Saturday, October 29, 2016:
How to set the System Name, Contact and Location on a Securestack

0 replies

Be the first to reply!