Header Only - DO NOT REMOVE - Extreme Networks

2016-11-14: New GTAC Knowledge Articles November 6 - 12, 2016

Here are the new articles that were published November 06 - November 12, 2016 in GTAC Knowledge:

Sunday, November 06, 2016:
What versions of VRRP supported in S-series and N-series ?

Monday, November 07, 2016:
Why fdb aging timer shows “0”?
Switch ports showing bcm_custom_extr_eee_config_set(16700): eee set enable error, port=9, unit=0, enable=0, rv=-16 log gmessages
Show Management command is not available
What Does "Function Pointer Database is not fully initialized" Mean
How does DHCP-based Device Type Detection work in NAC/Indentity and Access/Control appliances?
Management Login to Brocade Switch Not Working With NAC
How to configure WM3000 for DNS resolution
How to reboot just one slot on bonded 7100-series
Missing Certificate Information in NAC Manager and OneView Events
How to reset a WS-AP26XX Access Point back to factory default
How to enforce policy without pushing down CoS values from the Policy Manager domain
How to setup IdentiFi Wireless Controller admin interface through CLI
Identifi access-points moving from their custom DFS channel to a non-DFS channel
Where can I download the Open Fabric Connect for Extreme Management Center or Netsight 7.x or higher

Tuesday, November 08, 2016:
Adjusting Data Retention Settings
Prioritizing Phone Traffic with One View
Can I combine two ports together with different media types to form a LAG in EXOS
Export AP Summary from One View to CSV File
How to Save and Manipulate Configuration Files on 800 Series
Siem: removeAllChildNodes popup error in Log Activity view when mousing over a field
when removing one of each link in v320 stacking i lose connectivity
Can you change a Captive Portal from B@EWC to B@AP when the client successfully authenticates?
Is WCCP supported in Exos switches?
Meaning of MSM-A: CPU 0: soft watchdog expiration warning EPC 803f6e14(_spin_unlock_irqrestore+0x4 log message
Summit switch Temperature "Overheat" behavior
Reboot due to memory depletion of process POE
BD10K:HAL Process crash -Signal 6

Wednesday, November 09, 2016:
Is it possible to set a static IP address on an ExtremeCloud controlled AP?
What is the supported OS for V2110 Hyper-V
How to force a Gigabit port of an EOS-based switch to only advertise speed 1000 and duplex Full
800-SERIES loses port settings configuration after a reboot
What PoE standards does the ISW support?
Fans failed error on x440-24t even if fans are not rotating on purpose.
VM's does not pass dot1x authentication after VM reboot
Summit x620 switch shows External PSU as "powered off" always
Are EXOS switches affected by Vulnerability CVE-2016-1409?

Thursday, November 10, 2016:
Import Policy from Extreme Wireless Controller to Extreme Management Center
Netsight: no traps from any devices in the Traps tab
S-Series: Configuring Antispoof Arp-inspection and Duplicate Ip Address detection without using Authentication or DHCP
Who is responsibel for maximum Transmitpower or antenna gain on the Scalance W786C-2IA-RJ45
System memory depleted for process "dot1ag" caused unexpected reboot
EXOS DHCP Server DNS Issue.
How do I configure an EXOS based switch to work with a C4110 LAG?
Idle timeout feature is not present in Chalet

Friday, November 11, 2016:
'Message Queue full for component 96' error
WS-AP3610 previously converted to sensor not responding to usual passwords - cannot be converted back to AP
How to generate a show support from Extreme Management Center
Users Routed Through S-Series Cannot Be Managed by Remote Desk Top From other End of VPN tunnel
Network Load Balancing ( NLB ) on the 7100 Platform
Users unable to authenticate when using proxy Radius
How to see what MAC addresses are learned on a port

Saturday, November 12, 2016:
Can the Minimum Basic Rate be changed on a Cloud AP

0 replies

Be the first to reply!