2016-11-21: New GTAC Knowledge Articles November 13 - 19, 2016

Here are the new articles that were published November 13 - November 19, 2016 in GTAC Knowledge:

Sunday, November 13, 2016:
Is the Pluggable Transceivers 10053H supported on the S-Series
Error: Failed to install image - This hardware is not supported for this software release.

Monday, November 14, 2016:
VPN Fails and Cannot Read AAA User List After XSR Crash or Reboot
HWC & NAC redirect issue "Internal Error"
NAC, Wireless Appliance - group of wireless device unable to authenticate
FN414 - Memory Leak in HAL Process in EXOS 16.1.4
Can I edit a dynamic access-list in EXOS
Limited Connectivity and performance issues on wireless client with enabled 802.11k

Tuesday, November 15, 2016:
Complete loss of POE " PoE controllers on slot 2,3,4 are not accessible
What is the recommended firmware for a Wireless Controller
VN 2012 001 (CVE-2008-5161 CVE-2006-5051 CVE-2008-1483)
Apple Devices loss connectivity with

Wednesday, November 16, 2016:
Is it possible to set a preferred wireless SSID list for clients on a controller configuration?
Is WAS supported in NMS7?
AP showing with no uptime, but has a control tunnel. Does not service clients
VOIP phones are not accepting LLDPDU
Unable to view cases of co-workers within my organization
S-Series log reports LLDP[1]LLDP unknown OUI 0x7f on port ge.1.28 received from MAC address z0-09-ed-07-2b-e7".
What are the limits on numbers of VNS and SSID's per AP radio
S-Series error when blade inserted: out-of-band communication error
Captive portal redirect at AP fails to occur after 802.1X authentication completes successfully
Can stacking be configured between Summit X440 and Summit X440-G2 switches
Vulnerability CVE-2016-5195 on EXOS
What is the minimum and maximum sflow sample rate that can be configured on Exos switches

Thursday, November 17, 2016:
How to test LDAP connectivity with Extreme Management Center
Controller loses contact with network ARP entry for default gateway becomes incorrect
VRRP is gateway not reachable after reboot in BlackDiamond 8800 c-series cards
Checkpoint high availability traffic being CPU forwarded
Error when upgrading AP via CLI

Friday, November 18, 2016:
Purview / Analytics appliance creates an error 139 during an enforce
Service and Support Integration Guide for Zebra Partners of WLAN and ADSP Products
WinCollect sends incomplete messages when configured with XPath Query

Saturday, November 19, 2016:

0 replies

Be the first to reply!