Header Only - DO NOT REMOVE - Extreme Networks

2017-01-23: New GTAC Knowledge Articles January 15 - 21, 2017

Here are the new articles that were published January 15 - January 21, 2017 in GTAC Knowledge:

Sunday, January 15, 2017:

Monday, January 16, 2017:
BFD session DOWN messages seen when the “Rx” & “Tx” intervals are configured within 200ms
Purview - GRE tunnel traffic not being seen on Virtual Purview appliance

Tuesday, January 17, 2017:
TACACS Shared secret is present in with default configuration
DSCC / SIEM how to remove a quick search item
SecureStack A-Series: SSH vulnerability issue logged by Nessus Scan
Web Portal Unexpected Error message referencing Web Parts
K10 Chassis Unresponsive and not Passing Traffic
How to Prioritize traffic based on DSCP marking, on SecureStacks
Why do I see the number changing on the LED display of the switch?
How can I sign up to receive notification about security vulnerabilities ?
What is the purpose of mobility manager?
How many station session event types are in ExtremeWireless?
What is AP Feature Compatibility Matrix in V10.11?
What is LED pattern when AP goes into Guardian role?
What is direction for "In" and "Out" in Policy Rules on IdentiFi Wireless?
NAC Integration Guides - Guest Captive Portal with Extreme Wireless and Local Database Authentication
NAC pre-registration vs self registration
Where do I attach antenna cables to AP 3965e
Palo Alto module not connecting on Netsight
How to Change the content of the Sponsored Registration email used for Portal Registration
Why does the Child AP in a WDS Bridge have a Yellow Status LED?
Cannot add CEP port to VPLS service VMAN on x460 platform
How do I access the Active Clients by Wireless AP report in 10.21 firmware

Wednesday, January 18, 2017:
Client is disconnected during 802.1x authentication attempt citing "Authentication Failure" for client disconnect reason
Siem: How do you disable the Health Metric Informational Event
Out discards incrementing on routed links
Teklogix connection and roaming issues with 3935e access points
Slow performance when MAC authentication is enabled
NAC or Access Control appliance takes longer to boot with a secondary interface created on it.
Memory leak observed in "AAA" process when netlogin dot1x client timesout or authentication failed for the client.
Short Loop when restarting MLAG ports in BDX8

Thursday, January 19, 2017:
How to create a new Device Type Group in NAC
S-Series: Blade reset in Thread Name: ipdhcps
Changing vr causing switch to reboot

Friday, January 20, 2017:
Can the 40G ports on the VIM-2q be partitioned into 4x10G?
How to Configure an 802.1Q Trunk on XSR Router
How to generate a syslog when lacp removes a port from the aggregation
How To Configure a Securestack to Route Multicast Using DVMRP?
Unable to upgrade firmware on selected device in Inventory Manager

Saturday, January 21, 2017:

0 replies

Be the first to reply!