Header Only - DO NOT REMOVE - Extreme Networks

2017-06-12: New GTAC Knowledge Articles June 4-10, 2017

  • 12 June 2017
  • 0 replies

Here are the new articles that were published June 04 - June 10, 2017 in GTAC Knowledge:

Sunday, June 04, 2017:
How many management options do we have in ExtremeWireless WiNG Access Point?

Monday, June 05, 2017:
Extreme WiNG Wireless Controller Will not Power Up
Can You Edit the Configuration File of a Controller to Upgrade Models of APs?
Can Radar show me if have authorized devices connected to unauthorized access points
WiNG Web Filtering Feature - Will a Web Filter License operate on AP7522 VC-Virtual Controller
AP3825 - periodic AP reboots, looks like a node leak crash, when multicast to unicast is enabled.

Tuesday, June 06, 2017:
Does WiNG v5.5.6 or lower AP Discovery/Reset Tool work with Legacy AP300
SNMPv3 Informs queue overflow = 1
S-Series / K-Series / 7100-Series - Why am I getting In Discards on my Tunnel Bridge Port (tbp)?
How do I configure PIM on a SecureStack
How to use Extreme Webshell from Extreme Management Center
How To Prevent Wing APs From Attempting To Adopt To Wing Controllers via CLI Instructions
Faulty Link for Release Notes
The 2.4 Ghz radio channel on all adopted APs is set to 1 although Smart-RF is being used.
Is RFS4000 compatible with AP300?
How long do ports remain disabled when using the out-action for flood rate-limiting?
Can EAC assess Linux Machines?
What is the WING URL Based Filtering or Web Filtering Feature
Oneview Wireless -> Clients -> clients view appears to only show clients for last seen time of 2:00am

Wednesday, June 07, 2017:
Can WDS still function if the controller is down ?
Extreme Webshell Version 8 does not support logging
Unable to launch legacy java applications if server port changed from 8080
Unable to delete SNMPv3 public community in Industrial Switch
How to hide the SSID from being broadcast on an Extreme Networks WiNG AP.
Rate limit pushed from Policy Manager after changes made via the GUI of the wireless controller will fail
S series module continuously rebooting with Dune error "General error in sand_trigger_verify_0_by_base"
Client Report doesn't work after Upgrade to
One View reporting Wireless Controller Bandwith Always Equals Zero
What is the maximum number of AP7522s can be deployed on a Virtual Controller installation?
When 4 or more WL3 phones connect to an AP3935 connectivity is lost or intermittent
How to configure Web Filtering feature in WiNG
L3 table full log appear because of false resource full triggered by link flaps

Thursday, June 08, 2017:
How to configure a range or list of ports at the same time on 200-series switch
Meraki APs showing down in console
How to change the Native VLAN on a WiNG Express AP
AP3710 running out of system memory and resetting
How to configure port isolation?
How to redirect traffic to egress a specific port in a LAG?
Bringup Patch Error - Patch is Not Required
Auto Provisioning Policy is not running
SSH to the device with user credentials is not working.
Switch reboots with EPM application wdg timer warning messages
How are L4 source and destination port range counted?
How to configure Layer 2 PBR?

Friday, June 09, 2017:
Unable to access GUI Interface on Controller
AP7522/AP7533 Client Bridge will not connect to TKIP WLAN
packet number to save out of range: 49
How to build a stack with 200 series switches?
Port Specific vlan not working with MLAG and EAPS
x440G2 - Fan error message format changed after EXOS upgrade

Saturday, June 10, 2017:

0 replies

Be the first to reply!