Here are the new articles that were published December 03 - December 09, 2017 in GTAC Knowledge
Sunday, December 03, 2017:
Wireless clients devices are preferring WS-AP3825 AP over WS-AP3610
Monday, December 04, 2017:
How does your ExtremeWireless access point with RADAR detect a rogue access point
What is the difference between BOSS and VOSS
How to create MeshConnex Policy using Express Manager
Chrome Browser not displaying stats when navigating around to different tabs then back to the device view
Radius accounting interim fast failover radio button doesn't reflect configuration
Tuesday, December 05, 2017:
How to Delete a VLAN from the All NAC Policy Mapping Configurations
What is the difference in putting an ip address on a port or a VLAN for 200 Series with examples.
How to change switch name on the 200-Series
How to name a vlan on the 200-Series
Configuring RIP on 200 Series
AP 3935i's won't pull config after upgrading V2110 running on MS Server 2016 to 10.41.02
How to install ADSP using ISO file?
How to use AP discovery tool to find WiNG devices?
Extremewireless Controller suddenly stops forwarding traffic until it is rebooted
mac-lockdown-timeout does not work on netlogin ports
How to Limit the Discovery Protocols Used by Network Monitor Cache.
Wednesday, December 06, 2017:
What ExtremeWireless devices are support with ExtremeLocation?
How to locate the serial number from a WiNG 5 device using the CLI (Command Line Interface).
Why can't certain WING Access Points shipped after June 2, 2016 be downgraded from firmware version 18.104.22.168-006R to prior legacy WING releases?
How to change IP Address on IdentiFi Wireless Controller physical management interface through CLI
Policy causes a loop when enabled on EAPS ring ports
How to create wireless reports with SNR
Thursday, December 07, 2017:
Why does the slot number blink on an EXOS switch?
Will the VX9000 serial number be modified if the hardware is replaced, but the same IP address used?
TCL Scripting does not support "ERROR"
7100-Series : Error and port failure - <3>NIM[1.tConsole]sfpDataI2cRawAccess: failed @ line 998, sdkUnit 0, sdk Port 29, offset 0, wf 0, rt 0, value 0x802a
Friday, December 08, 2017:
ISW reporting invalid PD
irqbalance and affinity_hint errors appear in syslog of appliance
What is OBSS in 10.41.xx ExtremeWireless firmware?
How to create Virtual Controller redundancy?
How to check and confirm if TELNET, SSH and WEB access is enabled or not from the Switch's CLI
Saturday, December 09, 2017:
sporadic VRRP transitions or OSPF timeouts