Switching & Routing

Our family of switching and routing solutions deliver a powerful combination of industry-leading performance with flexibility, visibility, and control to enable key applications supporting voice and video, virtualization and cloud computing.

439 Topics
1,425 Replies

Christina M Extreme Alum

ERPS now available on Industrial Switches

Extreme is happy to announce that you can now configure ERPS on an ISW Industrial Switch! For configuring ERPS from the web interface, see: https://documentation.extremenetworks.com/industrial_switches/web_config/Industrial_Switching/_Common/c_erps-intro.shtml For configuring ERPS from the CLI,...

info@systemhaus-genthin.de New Member

Integration CISCO Switches into Enterasys NAC

We have a customer who has a small network with 20 Cisco Switches, 2960 & 3560 and the customer want to switchover to Enterasys / Extrem. We have as a first step a new SSA150 System and the whole software Suite with NMS and NAC on the customer site. Now my Job is to integrate the Cisco Switches i...

Wawa New Member

Drag and Drop network simulator that helps candidates prepare for Extreme Certifications

Implemented

The command line is a daunting place for a newbie, especially if you're trying to break into the world of network administration and XOS design and configuration. A lot of effort has gone into designing user-friendly guides for the different Extreme line of hardware. Would it be possible to even t...

Ken Thomas Extreme Alum

2015-10-12: New GTAC Knowledge Articles October 4 - October 10, 2015

Here are the new articles that were published last week (October 04 - October 10 2015) in GTAC Knowledge: Sunday, October 04, 2015: How to create alarms for specific device groups in Netsight Console How to create an alarm in NetSight to show when a SecureStack member switch has failed Monday, Oct...

Ken Thomas Extreme Alum

2015-10-19: New GTAC Knowledge Articles October 11 - October 17, 2015

Here are the new articles that were published last week (October 11 - October 17 2015) in GTAC Knowledge: Sunday, October 11, 2015: none Monday, October 12, 2015: Downstream LACP LAG device ports are blocked when connected to MLAG switch ports How to flash all port LEDs on an EXOS switch Tuesday...

Ken Thomas Extreme Alum

GTAC Knowledge new articles June 23 - July 2, 2015

Here are the new articles that have been published since last week and this week to date (June 23 - July 2, 2015) in GTAC Knowledge: Thursday July 2, 2015: Routing loop due distribute-list not filtering redistribute routes SecureStack B5 will not boot up, "memPartAlloc: block too big" LED light...

Ken Thomas Extreme Alum

New GTAC Knowledge Articles August 23 - 29, 2015

We have made some changes to our processes for publishing Just In Time (JIT) articles, and over sixteen hundred new articles were published last week. With all this new content, please be sure to search the GTAC Knowledge Base for solutions. Here are the new articles that were published last week...

Ken Thomas Extreme Alum

2016-01-20: New GTAC Knowledge Articles January 10 - January 16, 2016

Here are the new articles that were published (January 10 - January 16 2016) in GTAC Knowledge: Sunday, January 10, 2016: none Monday, January 11, 2016: Can Summit stacks be made up slots with different link speeds? How to Locate the NetSight License File on the NetSight Server Failed to install E...

Ken Thomas Extreme Alum

GTAC Knowledge new articles June 22, 2015

Here are the new articles that have been published last week (June 13 - June 22, 2015) in GTAC Knowledge: Sunday 6/21/2015 3825i running 9.15.01.0121 reset condition Saturday 6/20/2015 Dragon: Upgrading a Dragon Appliance to v8.3 Error: unknown board type 0x0030 IdentiFi Wireless 802.1x user...

Ken Thomas Extreme Alum

New GTAC Knowledge Articles July 20-25, 2015

Here are the new articles that were published last week (July 20 - July 25, 2015) in GTAC Knowledge: Monday July 20, 2015: none Tuesday July 21, 2015: K-Series fabric module will not fully boot with debug log message: failed to initialize PHY hardware! S4 / S8 OPTION MODULE COMPATIBILITY QUESTION...

Ken Thomas Extreme Alum

New GTAC Knowledge Articles August 2 - 8, 2015

The GTAC engineers reviewed a lot of articles last week on Tuesday and as a result we published a very big list of articles! This is the largest group we have published so far in a week since after the launch of the GTAC KB. We are looking into grouping this list of new articles by product/software...

Ken Thomas Extreme Alum

New GTAC Knowledge Articles August 9 - 15, 2015

Another big week with lots of newly published articles - here are the new articles that were published last week (August 09 - August 15 2015) in GTAC Knowledge: Sunday, August 09, 2015: none Monday, August 10, 2015: How to Save and Recover the Master Encryption Key in an XSR How to install a pre-g...

Ken Thomas Extreme Alum

New GTAC Knowledge Articles September 13 - September 19, 2015

Here are the new articles that were published last week (September 13 - September 19 2015) in GTAC Knowledge: Sunday, September 13, 2015: LAG member port with modified speed configuration should not be allowed to add in LAG group. Monday, September 14, 2015: Router unable to foward L3 unicast traf...

Ken Thomas Extreme Alum

2015-10-05: New GTAC Knowledge Articles September 27 - October 3, 2015

Here are the new articles that were published last week (September 27 - October 03 2015) in GTAC Knowledge: Sunday, September 27, 2015: What commands show port vlan and tagging information Intermittently Not All Multicast seen by Client in IGMP Environment Monday, September 28, 2015: What is a Fi...

Ben Parker New Member

Visio Stencils with Connection Points

Planned

Hi, At some point could the visio stencils for current or at least future products include connection points on the device. I know they can be manually added, but it is one of those little things that ends up taking a lot of time up over the long term. Thank you

Pedro Sebastiao New Member

Help with "SCHAN errors detected on SoC unit 1" messege.

Question

(B2H124-48P - Fw:04.02.13.0003) Who can help me with the mean of the following message: Jan 1 00:00:00 10.248.0.20-1 UNKN[203503288]: broad_system.c(3605) 1190333 %% 7 SCHAN errors detected on SoC unit 1

Justin Blackburn New Member

Port Security

Question

I was wondering what options there are for enterasys b-series port security: 1 - I want to use port security to limit 1 mac address per port (like the "sticky" command in Cisco) to avoid users bringing in personal switches 2- I'm also (separately) looking into having the port shutdown if it is unp...

Nieko Adams

Users on the User vlan that I configured can not access the Mgmt vlan to administer the switch, how do configure them do be able to do so?

Users on the User vlan that I configured can not access the Mgmt vlan to administer the switch, how do configure them do be able to do so? Do I just create a static route from the User vlan to the Mgmt Vlan? or do I configure an ACL or something? I need to know the best way to go about this. All he...

Stanley Riley Jr. New Member

x460-48p error 5: fan failing / operational again over and over in the log

Hello, Has anyone seen these types of errors? We are seeing these in the log for both switches in a 2-switch stack. Is it really possible that 2 switches are having similar fan problems at the same time? 05/15/2015 10:39:17.80 Slot-2: Slot-2, Error 5: Fan #4 in slot 2 operational. Rpm 3485...

Ken Thomas Extreme Alum

2015-11-02: New GTAC Knowledge Articles October 25 - October 31, 2015

Here are the new articles that were published last week (October 25 - October 31 2015) in GTAC Knowledge: Sunday, October 25, 2015: How to Change the Boot Partition from within the SummitWM3000 CLI Switch configuration is lost after upgrade Monday, October 26, 2015: Cannot ping EXOS Switch MPLS:...

Ken Thomas Extreme Alum

2015-11-16: New GTAC Knowledge Articles November 8 - November 14, 2015

Here are the new articles that were published last week (November 08 - November 14 2015) in GTAC Knowledge: Sunday, November 08, 2015: none Monday, November 09, 2015: S-Series f/w 7.02 Configuring Loopback Interfaces for Passive OSPF S-Series f/w 7.03.06.0004 Loopback Interface cannot be SNMP Man...

Ken Thomas Extreme Alum

2016-02-08: New GTAC Knowledge Articles January 31 - February 6, 2016

Here are the new articles that were published January 31 - February 06 2016 in GTAC Knowledge: Sunday, January 31, 2016: Kernel Oops Crash Monday, February 01, 2016: How to create different switch access rules in NAC for LDAP (Advanced Directory) authentication to get different login credentials B...

Ken Thomas Extreme Alum

2016-02-22: New GTAC Knowledge Articles February 14 - 20, 2016

Here are the new articles that were published February 14 - February 20, 2016 in GTAC Knowledge: Sunday, February 14, 2016: MLAG FDB Sync Explained Is 802.11d World Mode Standard Supported on the IdentiFi Platform Monday, February 15, 2016: Syslog messages not being sent during bootup VRRP Routed...

Ken Thomas Extreme Alum

2016-02-29: New GTAC Knowledge Articles February 21 - February 27, 2016

Here are the new articles that were published February 21 - February 27, 2016 in GTAC Knowledge: Sunday, February 21, 2016: NAC Captive portal not redirecting to configured URL Monday, February 22, 2016: X440 Stack dual mastership Problem on vlan/vman after removing port from vman Network connecti...

Ken Thomas Extreme Alum

2016-06-20: New GTAC Knowledge Articles June 12 - 18, 2016

Here are the new articles that were published June 12 - June 18, 2016 in GTAC Knowledge: Sunday, June 12, 2016: none Monday, June 13, 2016: X450-G2 port stuck in ready state when connected to S8 Account Lockout Behavior Error message License Site How to check messages in the queue are dropped in E...

1
2
3
4
...
18
Next

Page 1/18

C

Christopher Frazee
6 likes
Y

Yacobucci, Ryan
5 likes
R

Rohan Abeysuriya
5 likes
S

sjhala
4 likes
S

Stephanos Kaishari...
4 likes

Cookie policy

We use cookies to enhance and personalize your experience. If you accept you agree to our full cookie policy. Learn more about our cookies.

×

Cookie settings

We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.

Basic
Functional

Normal
Functional + analytics

Complete
Functional + analytics + social media + embedded videos

Accept cookies