Hi, I know that the RFS4000 controllers are very old, but we still have some locations where we use it. We have two RFS4000 controller in an Cluster running up more that 5 years. A few days before ...
Hello community, I'm trying to configure AP410i to disconnect clients that falls below -75db, but in wireless configuration I cannot find any settings related to minimum signal strength, signal thre...
Hi, We have 24 AP7522 controlled by 1 virtual controller (same vlan, so) We are considering adding AP (10AP) in this environment, but AP310. Do you think there could be 2 virtual controllers (I do...
Hello, my company has some legacy 6522/7522 APs at some of our sites operating under redundant RF6000 controllers that we have not moved over to Aerohive and XIQ yet. Only a handful of sites co...
Hello, I am a little stuck with the config because for some reason my clients electing to not to utilize protocol 802.11a. My clients are cradlepoint ibr1700 (all of them, there are no other wirele...
Helo, In 2016 we bought 22 pieces and in 2017 another 40 pieces = 62 pieces AP6521 with WING v 5.8.3.9-006R. In 2019 we had to expand the network by another 10 (company development), ...
Dear Extreme Experts,
My company have 10 extreme switches x460-48t.
How to check their warranty status??? (I have information about product code and serial)
As a part of our device testing, we found that this AP (Extreme networks 5010 AP wireless access point - Wi-Fi 6E, ZigBee, Thread, Bluetooth, 802.11a/b/g/n/ac/ax (Wi-Fi 6E) -) is beaconing with an in...