Hello, There seems to be a discrepancy between the recommended SW version for XMC and XCC and only the later version of XCC is supporting the AP410C for instance. This being the case, I am wonde...
Good Morning, I have 2 XCC in HA. On a first I connect with radius account but it is not possible do the same with the 1st. It seems that I can configure only one NAS-ID for the same radius. Than...
One of our APs is reporting "Eth Power Status Low" on the device details page. I can't find information on this field anywhere. Does it mean that the AP is not getting enough power from POE? Model...
We are running a captive portal on Control (v8.5.6.17) and trying to migrate to XCC (05.36.03.0017). I have WPA2/Enterprise networks working but captive portal is causing me some grief. Essential...
Are AP510C/AP510CX universal APs, capable of connecting to Extreme Cloud or to Extreme Campus Controller? We own many AP410C universal APs connected to our ECC, looking forward o expand our hardware...
Hello, We have two large buildings and several small off site offices. What is the recommended structure of sites in XCC when you have this type of wireless network? We have several floors and ...
The Extreme Support Downloads page lists 4 separate release lines for E2120 appliance right now:
release version, release type, tags
ECA-05.16.06.008, maintenance, recommended, latest
ECA-05...
Hi Guys, I'm working on a customer deployment and got some issues using ExtremeControl and XCC (5.36.03). If I send RFC3580 Vlan Attributes to XCC from the Control, the 802.1x session from the clie...
When configuring a channel plan for smart RF, we can choose "all channels", which according to documentation
includes UNII-1 UNII-2A UNII-2C and UNII-3
excludes TDWR channels 120 124 128
In...
There are 2 sites connected by vpn. On every site there is a ve6120. I want to make sure that the access points on site 1 use the ve6120 on that site as primary controller same for site 2, ...