Hello all, I have a running setup with Policy Manager and Fabric Attach on Switch Engine. I want to use a new Policy with a new VLAN. This is working fine. With Policy Manager I can push both to t...
Hi, I manage about 200 switches with XIQ-SE AirGap mode. There are about 180 SwitchEngines and 20 FabricEngines. In it, in the DeviceView of VSP4900 (FabricEngine) The link information is output ...
Hi all! I've installed Fabric Manager and it seems that I cannot get it to draw the complete topology. It only shows a small subset of my Fabric Enabled devices. I've checked the logs and found out...
I am currently working on deploying a NAC appliance for a customer and I am puzzled by this occurrence. We have disabled .1x authentication globally on phones for this customer, and have configured t...
Is there a way I can get a csv of all the devices I have in XMC?
When I use the Export to CSV button in the devices tab it does not show the serials for all devices in a stack or all blades in...
I've successfully imported the Port_Status_Time_with_alias flexview. I would now like to modify it to also show a 'VLAN Name' column similar to that shown in the built-in 'VLAN/Port Status VLAN....
Hi team, Im deploying Analytics engine in rel 23.11.11 for VOSS and in the configuration itiall wizard I can see these net options: They are differents to old versions in which dual interface w...
Hello, I have used ZTP+ to configure EXOS switches automatically. I think software 21.1 or greater does not use option 125 and uses extremecontrol plus the domain name from DHCP and then DNS to reso...
Hello there! I have to push multiple SNMPv3 users to all of our Fabric Engine switches. Is there a way to do this with a XIQ-SE Workflow? Our external monitoring (Icinga) should use it's own user /...