Hi Team, This is about NLB topology and where (which VSPs) activate NLB on VLAN. I have cluster of NLB uniscast servers connected to a vIST that acts only as L2, and the L3 of the VLAN is on other ...
What model gbic/sfp do I need for single mode yellow fiber going 1.5 miles? I’ve been looking around but can’t find any info. I have a 1gb gbic in an Etherwan EasyPoe Box going 1.5 miles using...
Hi. Does someone know if VOSS.8.4.0 image or later on GNS3 support L2 VSN? I have tried to configure this one through GNS3 but it is not working. Control Plane works well but Data Plane does not. T...
Hi team, in rel 9.0 DHCP server was introduced for VOSS: Now Im trying to configure it on 5420 REL 8.10.2.0, but I cant find the "ip dhcp-server" commads. Im confused, What do i need ...
We have an 5320 (VOSS 8.8.1.0) which doesn't onboard into XIQ-SE 22.9 properly. It shows up in "Discovered" pane of XIQ-SE, and after Configuring it, it shows "ZTP+ Use Discovered IP Error" On the ...
Hi All, I was wondering if there are plans for implementing VOSS SPMB capabilities in EXOS, so the EXOS switches can work as BCBs/BEBs. VOSS has quite complicated command line interface compared to...
I read a book about Extreme Fabric Technology and it said "When it comes to fabric-management tools, the latest trend is cloud. If your organization is not quite ready for using the public cloud f...
Hi, I've got a Fabric engine where I use the NAC to assign the VLANs, and I've configured DHCP-Relay for dynamic ip address assignment for both L2VSN and L3VSN. In L2VSN all works well and the clien...