I have a client i am setting up VGVA for, they have an issue in regards to how VGVA works since their previous product did things differently. one of the things they are worried about is basically d...
iOS users can connect to a 802.1x SSID, but when roaming, most often fail to reconnect, Device GUI seems to connect and disconnect repeatedly. Roaming using Windows 10/11 seems fine as do Mac ...
Hi SIrs The cllent have Aerohive AP 130 and were controlled by Hive manager AP 130 firmware is 8.2.4.0 , Aerohive HiveManager version is 21.1.21.11 because of ap 130 has vulnerability i...
Hello We need to add a temporary SSID to just one access point in XIQ. We cannot seem to find how to do this ? Does anybody have any info about how to add SSID to AP without addign to the net...
Hi All, We have 5 AP230s and we are experiencing consistently bad performance on Wi-Fi calling. When Wi-Fi calling is enabled, it works intermittently. Calls will sometimes go through, sometim...
We have three SSIDs on a network profile. If we start to use the "Assign SSID using Classification Rules" feature to assign one of the SSID's to specific APs using CCG, but leave the "Assign SS...
Hello, I have a network with several AP's (460c). They are connected with zyxel GS-1350-12 HP switches. The firewall and switches are setup with the native VLAN 1 and the guest vlan 12. If I test th...
I have nearly 200 of the AP250 access points, but one failed an update and I am pretty sure it boots into a bootloader to the like. The reason I say that is: - I'm remote (I'm in the US, it is in Ir...
Hello. When issues occur and we are troubleshooting, it is helpful to be able to deauthenticate the client and force a reconnect. How can we do this in ExtremeCloudIQ? I was not abl...
Hi everyone, I´ve some strange situation with Android Smartphones in our Aerohive/Extreme Network (Mix of AP250 and 305C) environment. The Android devices itself get´s an valid IP and authenticated...