Hi I’m trying to achieve a simple “map to role based on RADIUS response” setup - there is a single SSID, and I want to place this into either a ‘access_filtered’ or an ‘access_normal’ VLAN. Th...
Hello Community, I started using the new Campus Controller for some of our locations. One location startet workinig with the WiFi and they had Problems with dropping WiFi connections. Is there a wa...
Hello,
We are currently running 10.21.X on our C5210 controllers and are planning to upgrade them this month. We mostly have 3935i AP's; however, we still have a good amount of 3710i AP's which...
I see in the tech specs the max output is 25dBm on 5 and 26dBm on 2.4. The max I can seem to set in the controller is 20dBm. Can anyone point me in the right direction?
Hello,
I'm looking for a way to report on MU's based on both SSID and assigned policy role. The idea is to be able to see which populations are connected to with SSID's and be able to identify t...
We are planning to deploy just 3 units of AP3916i without controller. Is it possible that I can configure it without a physical or virtual controller? Same goes for other IdentiFi APs that requires s...
Hi guys, Does anyone knows if there is a CLI guide for the XCC? I do have one for the Identify controller but it doesn’t seems to take the commands. Thanks Mig
Hello community, I successfully implemented an external Captive Portal on NAC with using IdentiFI Controller. Since the customer is using two NAC engines for redundancy I wondered what is the best p...
I am upgrading wireless for a site where one SSID is configured to allow AD joined computers to connect automatically using certificate based 802.1x authentication. This has been working great and th...
Hey, Can someone explain what exactly “Mobility” means in the following scenario concerning VE6120 virtual appliance: Unlicensed — (DEMO) When the appliance is not licensed, it operates in demo mod...