Hello community, I have an RFS4000 working as the main router/gateway for internet access on a small subnet with the NAT properly configured and operational. We have in place some port forward...
Need firmware update v5.7 for AP-6521-60020-EU for Motorola AP now I use WiNG v5.4 but I need v5.7 ti configure this AP for existing environment. Thx for Advance.
Further to a previous post on this forum, trying to get an AP into bridge mode, I've acquired an AP6522 which is supposed to support bridge mode, however under RF mode I can only select 2.4Ghz-wlan,5...
Hello, Extreme community! We have a problem with the SMART-RF functionality in our deployment. In a nutshell, something is causing "Select Shutdown hide" in an RF-Domain that has its own ded...
I recently bought 30+ Ap 7532i used from a school. But i seem to have some problems with them. They work fine but after setup i cant connect to the acess point via web or console. The AP crashes upon...
Hi everyone, I have 24 Wing AP310i-WR access points configured. I set one AP as the master, which acts as the Virtual Controller. If this AP fails, is it possible for another AP to automatically tak...
Hello ExtremeWireless community, We have a couple of AP-7532s that present an uncommon configuration in some scenarios, here is an excerpt: !
! Configuration of AP7532 version 7.7.0.0-018R
!
!...
Hi I have vx9000 that manage AccessPoint configuration, it is connected to other vx9000 that build tunnel L2TPv3. This vx9000 can manage only 60 tunnels. How can replace 2nd vx9000 with other serve...
Hello all, I have a NAC system that work around my LAN. Then I have a WIFI system (VE6120 Medium 10.04) on the same LAN I've deploy some AP's to distant branch, on one site is all ok, while the ot...