Extreme Networks

Chad5 · ‎07-02-2021

Hi, We are testing the XA access swithces to extend our fabric to remote sites, or for more advanced users who work from home who need more than just a VPN connection. Currently, we are running 8.3...

EF · ‎06-06-2019

Hi team, I´m unable recive traps in the XMC server form VSPs, and in the VSP logs I can see: SNMP ERROR Failed to create trap (Reason=Failed to create v3 trap) for host A.B.C.D:162 An...

_Alex_ · ‎07-19-2022

The ML-2452-PTA3M3 antenna has three antenna ports and supports MIMO. The AP310 has four (excluding BLE) antenna ports. My question - on which ports of the AccessPoint should I connect the ...

Sacha_Brys · ‎05-19-2020

What configuratoin is required to setup NAC to send outbound radius attributes for configuring ERS4900 with FA radius attributes like: dhcp snooping bpdu filtering slpp guard IP-Source Guard ...

SteveT · ‎03-25-2021

Hi, I have the below setup and running into an issue when bringing the MLT up between the two VSP7400’s which are in a V-IST cluster. We have a SMLT created on the V-IST cluster to a single static L...

JP-1 · ‎08-09-2021

Trying to find out a couple of questions. Can the K10 CLI be configured to mirror an entire vlan rather than mirroring each individual port? And are there resource limitations to mirrorin...

Yoann · ‎05-10-2019

Hello, I set up XMC with all its components (netsight, analytics, fabricmgmr and NAC) running 8.2.5.50. I also set up a cluster of VX9000 running 5.9.4.1-004R with one AP8533 (same version). ...

_Alex_ · ‎07-09-2021

I am sure to see this option on the wlan profile settings, but i can't find anything official in the specs?

bfaltys · ‎05-20-2021

We have our own fiber mesh and SPBM running fine. We are getting additional links at multiple sites from an ISP. The ISP is using q-in-q so we basically have a pseudowire from the core to each site. ...

ar1 · ‎08-13-2019

Hello, we are using XMC and NAC version 8.2.6.5 at VMWare and from time to time I see that the time is wrong (2h in the future). If I check the output of "systemctl status ntp.service" I see that...

Extreme Networks

Search

Access Switches (XA 14xx) in band mgmt solution

VSP - unable send traps to XMC SNMPv3

ML-2452-PTA3M3 and AP310e

How to configure NAC to send outbound radius attri...

Mac-Address not shared across MLT

Port Mirroring - K10 Series

How to add VX9000 to XMC wireless controllers tab

Does AP310 supports 802.11r (fast transition)?

Fabric Extend over ISP (Hub-and-spoke)

ntp shows wrong time on XMC and NAC-Gateway