Hi team, I’m having trouble while trying to copy running config to the remote ftp server. I have two VRFs (mgmt and default), each configured with 0.0.0.0/0. I’m able to ping the remote ftp ...
Hi Guys, Is possible increase system next-hop limit ? I receive every day message: System Next-Hop limits exceeded. Current Profile Nexthop 4000. Configured Next-Hops 4000
just purchased this switch and found that it only has v2.1.1 on it , when trying to upgrade firmware it indicates that v3 is required before installing 4 or 4.1, I would appreciate any help. I do not...
Hello,
Im looking to implement a leaf and spine setup using VDX6740's setup in pairs (for resilience of end devices) and then two VDX6940s to create a spine allowing multiple racks that have a p...
Hello All I have following situation on my EDGE Router (SLX-9640) with BGP. I have many of Transit connections and AS’s on the same Router, and between them 2x of them are from same Vendor (AS) with...
Hello, I do have a SLX 9540 in the wild running the newest 20.2.2b. When copying the TPVM I noticed slow performance in SCP, TFTP and other protocols. scp tpvm.tar.gz root@foo:/TPVM root@foo's p...
Hi, I installed vSLX 2.3.0 on Ubuntu 16.04 system and I’m using slxos 20.1.1 as OS. I followed the installation instructions in slx-20.1.1-vslx-guide.pdf and installed the whole thing into...
Hi
SLX 9140 NOS v17s.1.02, active BGP sessions with 2 peers, everything works fine, except port 179 is open on all IP addresses configured on any Layer 3 interface including loopback. Despite a g...
I’m working on a new network design and we will deploy metallb to setup many bgp sessions with slx9250/9740. I would like to ask how many peers can they handle as I cannot find this information from ...