Hi team, Allways in my AP templates I used port type "Uplink Port" with default native VLAN1 (untag) and configuring in the switch port the MGMT VLAN X in access, but I see two port types more: trun...
Hello Folks, I’ve picked up a couple second hand AP122s and I was able to reset/re-configure one of them with the serial connection and CLI. But it seems the previous owner of the second one didn’t ...
Hello, I'm having some issues with the Delta Update on AP5010, I always get the failure message, while applying the same configuration on other AP models like 510, and just the Delta Update is suffi...
Hello, Trying to understand how to setup a GRE tunnel between an AP and VGVA so the Guest SSID traffic is forwarded to the internet via the VGVA. The VGVA and AP are onboarded in XIQ and the AP has ...
Hey guys, someone can help me with this issue? I have an a brand new AP305C-1. Trying to upgrade the image from XIQ. and have this error Ok, then i try to upgrade diretcly via browser, finish wi...
Hi team, I want to connect AP410-C to a VSP with two interfaces, but any time I configure LACP on VSP I lost AP connectivity. In the AP template I have two possibilities: - Aggregate - Redundant ...
I need to migrate a 3917 from a 5210 controller to CloudIQ. I have been looking for documentation that would describe the process. I plan on adding the device to CloudIQ and then defaulti...
I want to use local ppsk across multiple sites. If connection to the local ppsk server at site 1 is lost does authentication stop for users ate site 2? Or doest the local ppsk database get propagated...
Hi, we have about 80 APs 305CX in a warehouse and we use some clients Zebra WT6000. Since upgrading firmware from 10.5.2.0 to 10.6.2.0 we have lot of deconnections with this clients. If we downgrad...
Hello, until we get the firmware upgraded, what sort of AP firewall policy is required to mitigate this vulnerability ? i.e inbound/outbound ? blocking port 5916 ? CVE-2023-35803 Thank you kindly