IronWare : Version 6.3.0hT163 Copyright (c) 2017-2019 Extreme Networks, Inc. I was trying to setup a VRF to isolate some routes from the global VRF, but it seems like traffic got blackhole after a...
Hello, I'm unsure if this is the correct forum to post on seeing that I'm talking about very old gear, so feel free to direct/correct me, etc... I've about 6 Foundry SuperX chassis with various 1Gb...
Hi All, We are planning to upgrade our MLXe-16 and MLX-8 (MPLS/VPLS) routers which are coming to EoS. What should the next transition model be compared with Cisco 9000 Series backbone switches ...
Hello, We are seeing high operating temperatures on the BR-MLX-10GX20-X2 LP modules. This is especially true for the one installed in Slot 2 of the MLXe-4 chassis. For instance, Sensor 2 of L...
We have never played with MTU/Frame size, all left at Default which show max-frame-size 1548 port wide. But i can't seem to ping across a fiber circuit to another CER (P2P) style /30 on each end ...
Hi Guys, For new MLXe router. after “enable” in every interfaces. Why are all ports still link down and no color green light indicator? How to enable ports? Regards...
Hi Guys, I want to remotely access our MLXe router. Right now I am configuring SSH and I can PING the interface management IP. I don't know why it is not working. Please help. Please...
Hello, I ask you about a request on system mode change. I had a MLXe4 with Management Module BR-MLX-MR2-X on XMR with v6.0 and i need to convert him on MLX system mode in v5.6. How...