Fetching SNMP information work fine for the default vrf, but no information about any other vrf. I try the following configuration and still have the same issue. If anyone can help it would be great...
I have asked support and they have pointed me here. we used to have a folder with our firmware for our current fabric on it and I'm unable to locate it. I don't have anything down and I have one spar...
Hi All, Currently, several VDX8770 and VDX6740T are configured with VCS fabric, as shown below. * VDX8770 <---> VDX6740T Here, we need additional configuration of Transparent firewall be...
Hello everyone, I am trying to figure out what I am doing wrong on a VDX 6740T switch. I am trying to basically set up a port for use as a point to direct connect to my laptop which is running a TFTP...
Hi all, I tried to reset the root password for my switch but I got this from the boot console, could someone help me out with the recovery string please: 1) Start system. 2) Recover passwo...
There is two part of the question here. As I asked before, if it was possible to use an ordinary USB flash drive. I couldn't get it to work. I formatted it FAT32 with a partition under 2...
all of the sudden the VDX6740 just "crashed"... and it restarted itself... but after reload itself. All the license was intact. However, all my config is gone. So my question is, is ther...
I need to bond two links from an AP, the AP only support SRC MAC+DST MAC, DST MAC, and SRC MAC. I didn't see one that match in the manual.... What load balance sho...