Hi Community I am trying to upgrade XIQ-SE with 24.10.11.15_64bit_install.bin from XIQ-SE 24.2 to XIQ-SE 24.10. on RHEL 9.4 Enterprise by CLI. I used the XIQ-SE Installation Guide 24.10.10. On page...
Hi Team, I was connecting for ssh to the new server (rel 24.10.10.70) and launch the script in the step 9 of the migration guide (https://emc.extremenetworks.com/content/oneview/install/migration_fr...
Hello, I have two tasks to finish a ztp+ deployment for a customer. One is apply port templates. The switches are 24 and 48 ports and the setup requires the last 4 ports to have one port template a...
Hi, I am trying to use the Apply Config Template workflow) (found on https://github.com/extremenetworks/ExtremeScripting/blob/master/XMC_XIQ-SE/oneview_workflows/xwf/Apply_Config_Template-24.2....
I've added my XIQ-C instance to my XIQ-SE Instance and would like to create a rule where the condition check is the Site ID that is defined in XIQ-C. We have an SSID that is broadcasted to dif...
Hi, Trying to access a distant SQL database from a workflow, I'm unable to import relevant python module. Is this natively possible or should I installed additionnal python module ? And if yes, how ...
We have an XIQ-SE and an XIQ-C instance and would like to mix some forms of dynamic VLAN assignment. Here's what we'd like to achieve: 1. The AP should be assigned it's management port in a VL...
In Site Engine, when I go to Network > FlexReports there is no data being read about our devices. What do I need to check to exhibit the information correctly? PS: I'm interested in seeing inform...
Because of the issues with XIQ-SE ver 24.7.10 I saw that there is an install .bin file under the ver 24.7.11. Can I upgrade from XIQ-SE ver 24.2.15.5 using ExtremeCloudIQSiteEngine_24.7.11.22_64...
Hi, I am trying to configure a policy for a group of users in the Access Control Engine but the actual policy that is being deployed to the switch does not correspond with what I am looking to achie...