How can I troubleshoot the poe switch. all ports suddenly shut down. the main problem is it was stacked to other switches. I don't know how to configure it in master slot 1. or are I going to pull o...
So we had a couple of switches that had previously been in a 4-slot stack. Stacking was disabled but when 2 of these switch where put in a stack and enable again they had slot-3 & 4 appear and do...
Hi everyone
I'm a noob with Enterasys sws. Please need your help
We've 6 switchs (2 Cisco and 4 Enterasys A2) every switch is in a different IDF, We ́re in the segmentation process and we'r...
Hi everyone, So I’m a new user here in the EW forums. So recently I started a new job and inherited the Extreme Wireless system. The downside is, there’s no documentation (long story...
Has anyone gotten this to work? I've enabled enhanced secure mode, configured 2 radius servers, set cli password telnet radius. However, when I go to login it says authentication failed, but on the W...
Hello, I am having issues with one of my Aerohive switches - SR2324P. Since it has not been used for quite a long time its HiveAgent version is outdated 1.1.25.0, which makes it unrecognisable for t...
Hi community, Customer was asking to get an overview about what optics he have in use for a specific campus. I checked that with command: “show port config no-refresh” and got: GERMUE...
Hi,
Is there a feature matrix that shows what XMC features are supported for 220 series switches? Does XMC supports firmware upgrades, configuration backup/restores? Does it support ZTP? Can we ...
I’ve found this feature in 220 Series datasheet. Anyone knows what is this functionality for ? Found no info in “200 series administration guide” (?). REGARDS Robert