Estimados: Buenos días, soy nuevo en este mundo. Por favor su ayuda, yo ejecuto a través del ssh el comando show adoption status y me muestra algo que me deja preocupado, detallo el resultado: DEVI...
Hello Community, I am in the deployment phase of a wifi project and for this I am testing the solution before going into production. When I simulate a controller failure (network disconnection) the...
...ccess all snmp-server community 0 private rw snmp-server community 0 public ro snmp-server user snmptrap v3 encrypted des auth md5 0 admin123 snmp-server user snmpmanager v3 encrypted des auth m...
Guys, call me crazy but how is it possible that our AP3915s do not (or no longer!?) send a vendor-class-identifier in their DHCP requests? Trying to reconfigure some stuff on DHCP server we stumbled...
Hi all, I put my email address in ADSP VM, but I don't receive any for alarms. And I see this in my logs : Message = Error sending e-mail notification to [my-email-address@.com]. Error: ...
airdefense VM adsp server WIPS v10.5 build 10.5.0-05 hotfixes: a6 Hello, I'm using a Netgear nighthaw wireless router to test airdefense Rogue detection and termination. I get the alarm...
Hi, we actually have two V6120 in active/passive mode, all the APs are connected on the primary one, how i can switch APs to the secondary ? Regards, Jonathan
Despite all efforts wifi0 won't change from 5dB. Nothing seems of note in the logs. things tried
manual setting change in GUI
radio power change in CLI
reset AP to default
delete and r...
Hello, I am installing a VE6120 and ended up with 3 interfaces (admin, data 1, data 2). Admin is out of band - VLAN 10 Data 1, data 2 - VLAN 16. While the documentation is stating that the vs...