Hello. I have ~10 AccessPoints AP410i (wing 7.7.1.8-009R) which work in same domain and select virtual controller via option "Enable auto election of VC". Created some vlan, linked to Wlan - Radio2 ...
Hi all, i have nx9000 wireless wing controller and i want to have one ssid in vlan 20 and configure dynamic vlan assignment for wireless clients connected to this ssid. i connected wing contro...
I have multiple RF domain on different area. but doesn't have RFS, NX controller, I would like to utilize one or two ap7522 to be act as controller for consolidate configuration, any possible?
Hi, I am need to download the firmware for Ap7532. I have a controller on old version and some devices I have bought earlier in case any replacement is needed are on a newer version now I have to up...
Hi all, Is there a way to show all APs with crash files on them? I could use "show wireless ap on" but I need to specify RF-Domain. The problem is there are many RF-Domains so I would h...
I have an AP305cx with unknown mode. It reboots continously and i can press "s" to stop boot but It goes to pine mode pine> set_hwSomeone know cli command in pine mode? I can't have set...
Hi all, I am having trouble configuring nat on a standalone AP305C running WiNG. The AP might not be in the right mode to support NAT and routing but I can't find the right documentation. I tried r...
Hi there, I have a few standalone AP305C's running with WiNG (not IQE), and have no internet access. I am trying to find documentation on how to enable SNMP on these so that I can start monitoring ...